On 11/11/2026 11:26, Icenowy Zheng wrote: > 在 2026-11-10二的 13:00 +0100,Krzysztof Kozlowski写道: >> On Mon, Nov 09, 2026 at 05:07:04PM +0100, Romain TISSERAND wrote: >>> The panel is a MIPI-DSI peripheral, a child node of its DSI host, >>> and the >>> driver does not use a graph port. A port is only needed when the >>> host >>> links its panel through the graph; other DSI hosts, such as the >>> Allwinner >>> sun6i-a31-mipi-dsi one, link the child node and have no output port >>> to >>> point at. The PinePhone panel is described that way on the same >>> host, >>> without a port. >>> >>> Keep the port allowed (panel-common) but no longer required, as for >>> other >>> DSI panels such as ilitek,ili9881c. >> >> ilitek,ili7807s and a few others have the same and it is confusing. >> The >> port should be required when this is connected over SPI or I2C, but >> not >> for MIPI DSI. I think that for MIPI DSI port is meaningless so >> actually >> incorrect. > > I found that the dw-mipi-dsi common code (e.g. on Rockchip SoCs with > dw_mipi_dsi-rockchip) would expect the panel to be connected via a port > even if it's the child node of the DSI controller. > > Such an example is at arch/arm64/boot/dts/rockchip/rk3399-pinephone- > pro.dts . >
Yes, the same for Qualcomm. So I actually wonder who needs the change here. Best regards, Krzysztof
