On Sat, Nov 07, 2026 at 01:13:54PM +0100, Michiel van Beers wrote:
> The LM3630A has a full-scale current setting per control bank, from
> 5 mA to 28.25 mA in steps of 750 uA. Boards whose LED strings are rated
> for less than the chip default of 28.25 mA have no way to describe that
> limit.
> 
> Add the common led-max-microamp property to the led@0 and led@1 nodes.
> The property is optional, so existing devicetrees remain valid.
> 
> Signed-off-by: Michiel van Beers <[email protected]>
> ---
>  .../devicetree/bindings/leds/backlight/lm3630a-backlight.yaml    | 9 
> +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git 
> a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml 
> b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> index 6393cbf3afdf..a031679d5468 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -77,6 +77,14 @@ patternProperties:
>          minimum: 0
>          maximum: 255
>  

I do not see in this node reference to LEDs common.yaml. You need it for
any common properties.

Best regards,
Krzysztof

Reply via email to