From: Mahadevan P <[email protected]>

Enable the PS195 HDMI path on Glymur CoB/SiP, Mahua and Kalambo CRDs
through their shared glymur-crd.dtsi.

Describe the bridge, connector, supplies and four-lane DP2 connection
through the USB2 QMP combo PHY. Add the GPIO126 HPD state to glymur.dtsi.

Signed-off-by: Mahadevan P <[email protected]>
Signed-off-by: Nabige Aala <[email protected]>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 142 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/glymur.dtsi     |   6 ++
 2 files changed, 148 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi 
b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 2ec62423ad79..87adeccaffc6 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -20,6 +20,35 @@ aliases {
                spi0 = &spi18;
        };
 
+       hdmi-bridge {
+               compatible = "parade,ps195";
+
+               vdd09-supply = <&vreg_hdmi_0p95>;
+               vdd12-supply = <&vreg_hdmi_1p2>;
+               vdd33-supply = <&vreg_hdmi_3p3>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               hdmi_bridge_in: endpoint {
+                                       remote-endpoint = 
<&usb_2_qmpphy_out_dp>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               hdmi_bridge_out: endpoint {
+                                       remote-endpoint = <&hdmi_con>;
+                               };
+                       };
+               };
+       };
+
        chosen {
                stdout-path = "serial0:115200n8";
        };
@@ -63,6 +92,17 @@ switch-lid {
                };
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con: endpoint {
+                               remote-endpoint = <&hdmi_bridge_out>;
+                       };
+               };
+       };
+
        pmic-glink {
                compatible = "qcom,glymur-pmic-glink",
                             "qcom,pmic-glink";
@@ -142,6 +182,53 @@ vreg_edp_3p3: regulator-edp-3p3 {
                regulator-boot-on;
        };
 
+       vreg_hdmi_0p95: regulator-hdmi-0p95 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_HDMI_0P95";
+               regulator-min-microvolt = <950000>;
+               regulator-max-microvolt = <950000>;
+
+               gpio = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               startup-delay-us = <1000>;
+
+               pinctrl-0 = <&hdmi_0p95_reg_en>;
+               pinctrl-names = "default";
+       };
+
+       vreg_hdmi_1p2: regulator-hdmi-1p2 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_HDMI_1P2";
+               regulator-min-microvolt = <1200000>;
+               regulator-max-microvolt = <1200000>;
+
+               vin-supply = <&vreg_l18b0>;
+
+               gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               startup-delay-us = <2000>;
+
+               pinctrl-0 = <&hdmi_1p2_reg_en>;
+               pinctrl-names = "default";
+       };
+
+       vreg_hdmi_3p3: regulator-hdmi-3p3 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "VREG_HDMI_3P3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 170 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               startup-delay-us = <2000>;
+
+               pinctrl-0 = <&hdmi_3p3_reg_en>;
+               pinctrl-names = "default";
+       };
+
        vreg_misc_3p3: regulator-misc-3p3 {
                compatible = "regulator-fixed";
 
@@ -545,6 +632,17 @@ &mdss_dp1_out {
        link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 
8100000000>;
 };
 
+&mdss_dp2 {
+       pinctrl-0 = <&usb2_dp_hot_plug_detect>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&mdss_dp2_out {
+       link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 
8100000000>;
+};
+
 &mdss_dp3 {
        /delete-property/ #sound-dai-cells;
 
@@ -826,6 +924,27 @@ ec_int_n_default: ec-int-n-state {
                bias-disable;
        };
 
+       hdmi_0p95_reg_en: hdmi-0p95-reg-en-state {
+               pins = "gpio55";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       hdmi_1p2_reg_en: hdmi-1p2-reg-en-state {
+               pins = "gpio54";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       hdmi_3p3_reg_en: hdmi-3p3-reg-en-state {
+               pins = "gpio170";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
        kybd_default: kybd-default-state {
                pins = "gpio67";
                function = "gpio";
@@ -1035,6 +1154,29 @@ &usb_1_qmpphy_out {
        remote-endpoint = <&pmic_glink_ss_in1>;
 };
 
+&usb_2_qmpphy {
+       /delete-property/ mode-switch;
+       /delete-property/ orientation-switch;
+
+       status = "okay";
+
+       ports {
+               port@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       /delete-node/ endpoint;
+
+                       usb_2_qmpphy_out_dp: endpoint@0 {
+                               reg = <0>;
+
+                               data-lanes = <3 2 1 0>;
+                               remote-endpoint = <&hdmi_bridge_in>;
+                       };
+               };
+       };
+};
+
 &usb_hs {
        dr_mode = "host";
 
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi 
b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 65a398c0a992..2d3f8fe2cf5d 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -6793,6 +6793,12 @@ data-pins {
                                        bias-pull-up;
                                };
                        };
+
+                       usb2_dp_hot_plug_detect: usb2-dp-hot-plug-detect-state {
+                               pins = "gpio126";
+                               function = "usb2_dp";
+                               bias-disable;
+                       };
                };
 
                ctcu@10001000 {

-- 
2.34.1

Reply via email to