On 09-11-2026 18:48, Krzysztof Kozlowski wrote:
On 09/11/2026 07:27, Jayant Shekhar wrote:
Document the Novatek NT37802 AMOLED DSI command-mode panel.

Signed-off-by: Jayant Shekhar <[email protected]>
---
  .../bindings/display/panel/novatek,nt37801.yaml    | 49 ++++++++++++++++++++--
  1 file changed, 45 insertions(+), 4 deletions(-)

diff --git 
a/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml 
b/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
index 1b38c1d0af68..be318cc84d52 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
@@ -4,26 +4,30 @@
  $id: http://devicetree.org/schemas/display/panel/novatek,nt37801.yaml#
  $schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Novatek NT37801 AMOLED DSI Panel
+title: Novatek NT37801 and NT37802 AMOLED DSI Panels
maintainers:
    - Krzysztof Kozlowski <[email protected]>
description:
-  Naming is inconclusive and different sources claim this is either Novatek
-  NT37801 or NT37810 AMOLED DSI Panel.
+  Naming is inconclusive and different sources claim the NT37801 panel is
+  either Novatek NT37801 or NT37810. The NT37802 panel uses the same common
+  DSI interface and regulator supplies, and additionally requires EXVDD.
What is EXVDD supply? The example DTS suggests it is something fake.


Its not fake, it would be something like below:

    display_panel_vdd: regulator-display-panel-vdd {
        compatible = "regulator-fixed";
        regulator-name = "display-panel-vdd";
        regulator-min-microvolt = <1100000>;
        regulator-max-microvolt = <1100000>;
        startup-delay-us = <233>;
        gpio = <&pmd8028_e1_gpios 2 GPIO_ACTIVE_HIGH>;
        enable-active-high;
        regulator-boot-on;
        pinctrl-0 = <&sde_disp0_vdd_active>;
        pinctrl-names = "default";
};


Thanks, Jayant

Best regards,
Krzysztof

Reply via email to