Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0, RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to PM6150L.
Due to hardware constraints we can only register 4 zones with pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Signed-off-by: erebion <[email protected]> --- .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 160 +++++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 79097ae409bab..d7a5df04a296c 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -61,6 +61,13 @@ key-volume-down { }; }; + msm_therm_sensor: thermal-sensor-msm { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + touch_en_vreg: regulator-touch-en { compatible = "regulator-fixed"; regulator-name = "touch_en_vreg"; @@ -106,6 +113,74 @@ active-config0 { }; }; + pa0-thermal { + thermal-sensors = <&pm6150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa1-thermal { + thermal-sensors = <&pm6150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pm6150l_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rfc-flash-thermal { + thermal-sensors = <&pm6150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&msm_therm_sensor>; + + trips { + trip0 { + temperature = <45000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <55000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + xo-thermal { thermal-sensors = <&pmk8350_adc_tm 0>; @@ -392,6 +467,83 @@ &mpss { status = "okay"; }; +&pm6150l_adc { + pinctrl-0 = <&pm6150l_adc_default>; + pinctrl-names = "default"; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "pa_therm1"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "msm_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "pa_therm0"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@54 { + reg = <ADC5_GPIO3_100K_PU>; + label = "rear_cam_flash_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@55 { + reg = <ADC5_GPIO4_100K_PU>; + label = "quiet_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; +}; + +&pm6150l_adc_tm { + status = "okay"; + + pa-therm1@0 { + reg = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + pa-therm0@1 { + reg = <1>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + rear-cam-flash-therm@2 { + reg = <2>; + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + quiet-therm@3 { + reg = <3>; + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pm6150l_flash { status = "okay"; @@ -405,6 +557,14 @@ led-0 { }; }; +&pm6150l_gpios { + pm6150l_adc_default: adc-default-state { + pins = "gpio6", "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + &pm6350_gpios { vol_down_n: vol-down-n-state { pins = "gpio2"; -- 2.53.0
