Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] clk: sunxi-ng: de2: missing select REGMAP_MMIO for
  SUN8I_DE2_CCU
--

commit d1c006fcc75e6e1facbfb7f265581bef0d4d672a
Author: Jernej Skrabec <[email protected]>

clk: sunxi-ng: de2: Export register regmap for DE33

This commit removes the hardcoded DE33 plane mapping writes from the clock
driver and exports those registers via an MMIO regmap instead.

> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c 
> b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> index 6ec6c0dc4c261..f17570efafaae 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c

[ ... ]

> @@ -336,13 +367,19 @@ static int sunxi_de2_clk_probe(struct platform_device 
> *pdev)
>       }
>  
>       /*
> -      * The DE33 requires these additional (unknown) registers set
> +      * The DE33 requires these additional plane mapping registers set
>        * during initialisation.
>        */
>       if (of_device_is_compatible(pdev->dev.of_node,
>                                   "allwinner,sun50i-h616-de33-clk")) {
> -             writel(0, reg + 0x24);
> -             writel(0x0000a980, reg + 0x28);
> +             struct regmap *regmap;
> +
> +             regmap = devm_regmap_init_mmio(&pdev->dev, reg,
> +                                            &sun8i_de2_ccu_regmap_config);
> +             if (IS_ERR(regmap)) {
> +                     ret = PTR_ERR(regmap);
> +                     goto err_assert_reset;
> +             }
>       }

[Severity: Medium]
Should SUN8I_DE2_CCU select REGMAP_MMIO in drivers/clk/sunxi-ng/Kconfig?

Without it, enabling SUN8I_DE2_CCU when REGMAP_MMIO is disabled (for
example under COMPILE_TEST=y with ARCH_SUNXI=n) or built as a module with
SUN8I_DE2_CCU=y breaks compilation on sun8i_de2_ccu_regmap_config or fails
to link __devm_regmap_init_mmio_clk().

-- 
Sashiko AI review ยท 
https://sashiko.dev/#/patchset/[email protected]?part=2

Reply via email to