Hi all,

On Fri, 2026-05-29 at 12:05 +0100, Vitor Soares wrote:
> From: Vitor Soares <[email protected]>
> 
> Add support for the LG LP156WF1 15.6" Full-HD dual-link LVDS panel and
> a Verdin AM62 overlay for using it through the Verdin Development Board
> with the Verdin AM62 Mezzanine LVDS interface.
> 
> This is a follow-up to an earlier attempt [1], where panel-lvds.yaml
> was incorrectly extended to describe dual-link panels. Back in 2023,
> when a generic dual-channel LVDS binding was proposed, Rob Herring [2]
> pointed out that dual-link panels should follow the existing
> advantech,idk-2121wr pattern instead of introducing a new generic
> compatible.
> 
> Following that approach, this series adds a dedicated binding for
> lg,lp156wf1, with the dual-link LVDS ports described by
> lvds-dual-ports.yaml, and excludes it from the generic panel-lvds
> schema selection.
> The second patch adds the Verdin AM62 overlay for the LG LP156WF1 panel
> on the Mezzanine LVDS connector.
> 
> This series should be applied on top of [3] to avoid conflicts in the TI
> device-tree Makefile with the other overlay additions.
> 
> [1] https://lore.kernel.org/all/[email protected]/
> [2] https://lore.kernel.org/all/[email protected]/
> [3] https://lore.kernel.org/all/[email protected]/
> 
> Vitor Soares (2):
>   dt-bindings: display: panel: Add LG LP156WF1
>   arm64: dts: ti: k3-am62-verdin: Add Mezzanine with LG LP156WF1 LVDS
>     panel
> 
>  .../bindings/display/panel/lg,lp156wf1.yaml   | 105 ++++++++++++++
>  .../bindings/display/panel/panel-lvds.yaml    |   1 +
>  arch/arm64/boot/dts/ti/Makefile               |   5 +
>  ...verdin-dev-mezzanine-lvds-lg-lp156wf1.dtso | 131 ++++++++++++++++++
>  4 files changed, 242 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/panel/lg,lp156wf1.yaml
>  create mode 100644 
> arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-lvds-lg-lp156wf1.dtso

Gentle ping on this series. The binding has a Reviewed-by from Conor,
and as far as I can see nothing is pending on my side.

Let me know if a rebase or a resend would help.

Thanks,
Vitor

Reply via email to