This series adds initial Linux support for the Parade PS195 DP-to-HDMI
bridge and uses it to enable HDMI on the Qualcomm Glymur CRD family
(Glymur CoB/SiP, Mahua, and Kalambo).

The PS195 operates autonomously using firmware loaded from external
SPI flash — it handles link training, EDID access, and hotplug detection
without host register intervention at runtime, so no existing bridge
driver fits its power-sequencing and reset model.

It introduces:

- a DT binding for PS195 (supplies, optional reset GPIO, and port graph),
- a DRM bridge driver that implements PS195 power sequencing and PM handling, 
and
- arm64 integration (defconfig + shared glymur-crd.dtsi wiring) so all three
  variants can route DP over USB2 QMP combo PHY to HDMI through PS195.

Deps:
PHY PLL change: 
https://lore.kernel.org/all/[email protected]/
Glymur commonize change for regulator: 
https://lore.kernel.org/all/[email protected]/

---
Changes in v2:
- Converted the driver from a platform driver to an I2C driver
- Replaced the platform hdmi-bridge root node with a proper I2C child node 
under &i2c13
- Chane the order of power on and reset action in the driver (Krzysztof)
- Link to v1: 
https://patch.msgid.link/[email protected]

To: Mahadevan P <[email protected]>
To: Andrzej Hajda <[email protected]>
To: Neil Armstrong <[email protected]>
To: Robert Foss <[email protected]>
To: Laurent Pinchart <[email protected]>
To: Jonas Karlman <[email protected]>
To: Jernej Skrabec <[email protected]>
To: Luca Ceresoli <[email protected]>
To: David Airlie <[email protected]>
To: Simona Vetter <[email protected]>
To: Maarten Lankhorst <[email protected]>
To: Maxime Ripard <[email protected]>
To: Thomas Zimmermann <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
To: Bjorn Andersson <[email protected]>
To: Konrad Dybcio <[email protected]>
To: Abel Vesa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Nabige Aala <[email protected]>

---
Mahadevan P (4):
      dt-bindings: display: bridge: Add Parade PS195
      drm/bridge: Add a driver for the Parade PS195
      arm64: defconfig: Enable the Parade PS195 bridge
      arm64: dts: qcom: glymur-crd: Enable HDMI output via PS195

 .../bindings/display/bridge/parade,ps195.yaml      | 111 +++++++++++
 MAINTAINERS                                        |   7 +
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi           | 147 +++++++++++++++
 arch/arm64/boot/dts/qcom/glymur.dtsi               |   6 +
 arch/arm64/configs/defconfig                       |   1 +
 drivers/gpu/drm/bridge/Kconfig                     |  10 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/parade-ps195.c              | 204 +++++++++++++++++++++
 8 files changed, 487 insertions(+)
---
base-commit: 944e974742c54a1d8236fe16897644c35ffd6433
change-id: 20261112-mahua-hdmi-8ee75b4fd29a

Best regards,
--  
Nabige Aala <[email protected]>

Reply via email to