The internal eDP panel of the MNT Reform 2 with the i.MX8MQ module does
not show a stable picture. There are two problems.

The panel-edp mode for the Innolux N125HCE-GN1 is a 70 Hz mode that is
not in the EDID of the panel. Patch 1 replaces it with the 60 Hz timing
from the EDID.

LCDIF underflows at 1920x1080. Patch 2 connects DCSS to the MIPI-DSI
host instead and leaves LCDIF disabled.

Patch 2 depends on patch 1. The video PLL rate in the device tree is
four times the 138.78 MHz pixel clock of the new mode.

Signed-off-by: Christian Gmeiner <[email protected]>
---
Christian Gmeiner (2):
      drm/panel-edp: Fix Innolux N125HCE-GN1 mode
      arm64: dts: imx8mq-mnt-reform2: Drive the internal panel from DCSS

 .../boot/dts/freescale/imx8mq-mnt-reform2.dts      | 52 ++++++++++++++++++++--
 drivers/gpu/drm/panel/panel-edp.c                  | 15 ++++---
 2 files changed, 56 insertions(+), 11 deletions(-)
---
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
change-id: 20261116-reform2-internal-panel-35c872aabb28

Best regards,
-- 
Christian Gmeiner <[email protected]>

Reply via email to