Hi, This series adds support for the VIEWE 7KF82 7" 720x1280 in-cell MIPI-DSI panel based on Jadard JD9365TX (2-lane video mode), plus the companion I2C touchscreen and I2C backlight MCU used on the same FPC.
This is a different programming model from the existing JD9365DA driver (panel-jadard-jd9365da-h3.c): page select uses 0xDE (not 0xE0), bring-up uses 0xDF unlock, and lane config is via 0xCC rather than 0x80. The init sequence and bindings are therefore kept separate. Tested on Raspberry Pi 4 and Raspberry Pi 5 with a downstream dtoverlay (not included here). A matching series is also under review for the Raspberry Pi downstream kernel: https://github.com/raspberrypi/linux/pull/7633 Patches: 1/6 dt-bindings: display: add VIEWE JD9365TX panel binding 2/6 dt-bindings: input: add Jadard JD9365TX touchscreen binding 3/6 dt-bindings: backlight: add VIEWE I2C backlight binding 4/6 drm/panel: add VIEWE JD9365TX 7 inch DSI panel 5/6 Input: add Jadard JD9365TX in-cell touchscreen driver 6/6 backlight: add VIEWE I2C backlight driver Signed-off-by: Hefei <[email protected]> --- 0 files changed -- 2.47.0
