Hello,
This patchset introduces support for the TX & RX DMA transfers in the
am335x/omap I2C controller. I tested this implementation on AM335x 
(Beaglebone Black) and things seem to work fine.
Also, I noticed some unused arguments in the receive/transmit_data()
functions, so I added a small cleanup patch.

Kind regards,
Antoni Pokusinski
---
Changes since v1:
* new patch "i2c: omap: remove unused is_rdr and is_xdr ..."
* probe: added `goto err_dma_free` instead of `return`
         in the case of failed `i2c_add_numbered_adapter()`
* changes in XRDY/RRDY, XDR/RDR interrupts management:
  - init: do not enable the above-mentioned intrerupts
  - xfer_msg: enable the interrupts before any non-DMA transfer
  - xfer_msg: disable the interrupts after any non-DMA transfer
* xfer_msg: added checks on `omap->cmd_err` to catch
            NACK or AL error occured during DMA transfers
* general: moved scheme-related macros to the top of the file

Antoni Pokusinski (4):
  dt-bindings: i2c: ti,omap4-i2c: Add DMA properties
  ARM: dts: am33xx-l4: Add missing DMAs for I2C controllers
  i2c: omap: remove unused is_rdr and is_xdr function arguments
  i2c: omap: add DMA support

 .../devicetree/bindings/i2c/ti,omap4-i2c.yaml |  12 +
 arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi      |   4 +
 drivers/i2c/busses/i2c-omap.c                 | 363 ++++++++++++++++--
 3 files changed, 350 insertions(+), 29 deletions(-)

-- 
2.56.1

Reply via email to