On Thu, Nov 19, 2026 at 10:30 AM Mario Limonciello
<[email protected]> wrote:
>
>
>
> On 11/11/26 10:43, Mario Limonciello wrote:
> > amdgpu needs to know the bus number the platform assigned a device to
> > be able to match firmware images against the right device.
> >
> > This was previously adjusted to be a soft filter due to
> > commit 11c141672045f ("drm/amdgpu: Fix VFCT bus number matching with
> > soft filter") where if everything but the number matched to take a device.
> >
> > This however fails when there are two identical devices.  Instead save the
> > initial bus number to the PCI device structure and then match that.
> >
> > Link: 
> > https://lore.kernel.org/linux-pci/[email protected]/
> > Link: 
> > https://lore.kernel.org/amd-gfx/[email protected]/
> > Signed-off-by: Mario Limonciello <[email protected]>
> > ---
> > Changes in v6:
> > - Capture the firmware secondary bus number when reading bridge windows and
> >    ignore unconfigured values so rescans cannot replace it with runtime data
> >    (Sashiko).
> > - No change needed in the VFCT consumers; they continue to read the cached
> >    value from the upstream bridge.
> > - Link to v5: 
> > https://patch.msgid.link/[email protected]
> >
> > Changes in v5:
> > - Record the firmware secondary bus number only on the bridge struct 
> > pci_dev,
> >    guard it with a validity bit, and keep it across rescans (Bjorn, Lijo).
> > - Drop pci_bus::number_initial and have amdgpu/radeon read the saved bridge
> >    number when matching VFCT entries.
> >
> > Changes in v4:
> > - Retain secondary bus bus number for a bridge across rescans, and the 
> > child bus is initialized
> >    from it during allocation, before registration callbacks run. (Sashiko)
> > - Rename variable to clarify it's for bridges (Lijo)
> > - Link to v3: 
> > https://patch.msgid.link/[email protected]
> >
> > Changes in v3:
> > - Preserve the firmware bus number across bridge renumbering, capturing the
> >    secondary bus number before pci_scan_bridge_extend() clears it.
> > - Adjust member name in all patches
> > - Add tags
> > - Link to v2: 
> > https://patch.msgid.link/[email protected]
> >
> > Changes in v2:
> > - pci_alloc_dev(NULL) remains safe.
> > - For buses behind a reassigned bridge, the PCI core now saves the firmware 
> > secondary bus
> >    number before clearing the bridge configuration and carries it into the 
> > newly allocated bus.
> >    Devices discovered there inherit that original number.
> > - Add changes for radeon too.
> > - Link to v1: 
> > https://patch.msgid.link/[email protected]
> >
> > ---
> > Mario Limonciello (3):
> >        PCI: Cache bridge firmware secondary bus number
> >        drm/amdgpu: Match VFCT using initial PCI bus number
> >        drm/radeon: Match VFCT using initial PCI bus number
> >
> >   drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c | 23 ++++++++++-------------
> >   drivers/gpu/drm/radeon/radeon_bios.c     | 25 +++++++++++--------------
> >   drivers/pci/probe.c                      | 16 ++++++++++++++--
> >   include/linux/pci.h                      |  4 ++++
> >   4 files changed, 39 insertions(+), 29 deletions(-)
> > ---
> > base-commit: c03c1a14507dfaf8b856c2608f9ac216021fc222
> > change-id: 20261019-vfct-regression-2142fc52852a
> >
> > Best regards,
> > --
> > Mario Limonciello <[email protected]>
>

Is v6 preferred to v7?

Alex

Reply via email to