On 14/11/2026 06:00, Sebastian Reichel wrote:
This patch series updates the Synopsys Designware DisplayPort bridge
together with the only existing user: The Rockchip RK3576/RK3588:
[...]

Thanks for the series! Tested on a Mekotronics R58X-Pro (RK3588) on
v7.4-rc3 (it needs 941e3acfb358 from linux-next to apply there):

- dp1, full-size DP: Dell U3415W at 3440x1440.
- dp0, DP alt mode through usbdp_phy0 + FUSB302 with an Apple USB-C
  Digital AV Multiport adapter (A2119, pin assignment D, HBR3 x2):
  1080p60 on a small HDMI monitor and 3440x1440@50 on the Dell's HDMI
  input. Works in both orientations, and out-of-band HPD retrains the
  link after a flip. With the adapter plugged in at boot, this also
  needs your "drm/connector: Cache out-of-band hotplug events".
- Audio on both outputs to the Dell's speakers, over S/PDIF
  (spdif_tx2/tx5, simple-audio-card, mclk-fs 512, DAI 1). It also
  needs a clk core workaround I am not sure about: AUPLL's assigned rate
  rounds to the current rate, so the S/PDIF frac notifiers get
  PRE_RATE_CHANGE without POST_RATE_CHANGE and leave the muxes on the
  gated fractional divider; no DMA requests, EIO.

Tested-by: Ricardo Pardini <[email protected]> # Mekotronics R58X-Pro (RK3588)

mvg,
Ricardo

Reply via email to