2012/5/26 Rafa? Mi?ecki <zajec5 at gmail.com>: > 2012/5/6 Rafa? Mi?ecki <zajec5 at gmail.com>: >> + ? ? ? ? ? ? ? WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, >> + ? ? ? ? ? ? ? ? ? ? ?HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */ >> + ? ? ? ? ? ? ? ? ? ? ?HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */ >> + ? ? ? ? ? ? ? ? ? ? ?HDMI0_AUDIO_SEND_MAX_PACKETS | /* send NULL packets >> if no audio is available */ >> + ? ? ? ? ? ? ? ? ? ? ?HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be >> suffient for all audio modes and small enough for all hblanks */ >> + ? ? ? ? ? ? ? ? ? ? ?HDMI0_60958_CS_UPDATE); /* allow 60958 channel status >> fields to be updated */ > > Alex, I've problem with the above code. I've arrived to my parent's > house and I noticed audio doesn't work anymore with Onkyo TX-SR605. > The problem is caused by: > HDMI0_AUDIO_SEND_MAX_PACKETS > > Setting this bit doesn't seem to be problem for my Denon 1912, so I > didn't notice that earlier. Before the rewrite modesetting we weren't > set that bit, so it's actually a regression for my case with Onkyo. > > Can you say something more about this bit? My only solution is to just > don't set it, but maybe there's a better one?
The same happens when I connect my RV620 directly to the TV (not using Onkyo between as audio receiver). My TV is Sony BRAVIA KDL-52X3500. Setting bit HDMI0_AUDIO_SEND_MAX_PACKETS also causes no audio in TV. -- Rafa?
