From: Jerome Glisse <jgli...@redhat.com>
This fix black screen on resume issue that some people are
experiencing. There is a bug in the atombios code regarding
pll/crtc mapping. The atombios code reverse the logic for
the pll and crtc mapping.
Signed-off-by: Jerome Glisse <jglisse at redhat.com>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 54 +++++++++++++---------------------
1 file changed, 20 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c
b/drivers/gpu/drm/radeon/atombios_crtc.c
index 3bce029..7c1f080 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1696,42 +1696,28 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
return ATOM_PPLL2;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
- } else if (ASIC_IS_AVIVO(rdev)) {
- /* in DP mode, the DP ref clock can come from either PPLL
- * depending on the asic:
- * DCE3: PPLL1 or PPLL2
- */
- if
(ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
- /* use the same PPLL for all DP monitors */
- pll = radeon_get_shared_dp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- } else {
- /* use the same PPLL for all monitors with the same
clock */
- pll = radeon_get_shared_nondp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- }
- /* all other cases */
- pll_in_use = radeon_get_pll_use_mask(crtc);
- /* the order shouldn't matter here, but we probably
- * need this until we have atomic modeset
- */
- if (rdev->flags & RADEON_IS_IGP) {
- if (!(pll_in_use & (1 << ATOM_PPLL1)))
- return ATOM_PPLL1;
- if (!(pll_in_use & (1 << ATOM_PPLL2)))
- return ATOM_PPLL2;
- } else {
- if (!(pll_in_use & (1 << ATOM_PPLL2)))
- return ATOM_PPLL2;
- if (!(pll_in_use & (1 << ATOM_PPLL1)))
- return ATOM_PPLL1;
- }
- DRM_ERROR("unable to allocate a PPLL\n");
- return ATOM_PPLL_INVALID;
} else {
/* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
+ /* some atombios (observed in some DCE2/DCE3) code have a bug,
+ * the matching btw pll and crtc is done through
+ * PCLK_CRTC[1|2]_CNTL (0x480/0x484) but atombios code use the
+ * pll (1 or 2) to select which register to write. ie if using
+ * pll1 it will use PCLK_CRTC1_CNTL (0x480) and if using pll2
+ * it will use PCLK_CRTC2_CNTL (0x484), it then use crtc id to
+ * choose which value to write. Which is reverse order from
+ * register logic. So only case that works is when pllid is
+ * same as crtcid or when both pll and crtc are enabled and
+ * both use same clock.
+ *
+ * So just return crtc id as if crtc and pll were hard linked
+ * together even if they aren't
+ */
+ if (radeon_crtc->crtc_id > 1) {
+ /* crtc other than crtc1 and crtc2 can only be use for
+ * DP those doesn't need a valid pll to work.
+ */
+ return ATOM_PPLL_INVALID;
+ }
return radeon_crtc->crtc_id;
}
}
--
1.7.11.7
