[EMAIL PROTECTED] wrote:
>What northbridge chipset does your motherboard use?
>
>On Fri, 11 Jan 2002, Carl Busjahn wrote:
>
This is not a Athlon system, so it's a socket7 chipset.
I really don't know what the northbridge is on this motherboard, but
here's my /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 4).
Master Capable. Latency=16.
Prefetchable 32 bit memory at 0xe8000000 [0xebffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (
rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo
VP] (rev 71).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency=64.
I/O at 0xe000 [0xe00f].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 2).
IRQ 11.
Master Capable. Latency=64.
I/O at 0xe400 [0xe41f].
Bus 0, device 7, function 3:
Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).
Bus 0, device 17, function 0:
Ethernet controller: PCI device 1516:0803 (MYSON Technology Inc)
(rev 0).
IRQ 10.
Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xef000000 [0xef0003ff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc Radeon QD (rev 0).
Master Capable. Latency=64. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xed000000 [0xed07ffff].
>
>
>>I just recently got a Radeon "QD" (7200), (it's $58 on newegg.com...)
>>and it's in DRI mode. I get good frame rates, (About 160fps in a
>>1024x768 window with pulsar -fps).
>>The problem is, it locks up somewhat unpredictably. The magic sysrq
>>will sync, unmount, and reboot my machine fine, and the cursor still
>>moves. I know that the card is in agp 1x mode, and I'd like to bump it
>>up to 2x in xf86config, and I'd like some help in debugging the setup,
>>to see what's going wrong. Just as a side note, the 2d accelleration,
>>and mpeg accelleration are fine.
>>
>>Carl Busjahn
>>
>>
>>
>>
>>_______________________________________________
>>Dri-devel mailing list
>>[EMAIL PROTECTED]
>>https://lists.sourceforge.net/lists/listinfo/dri-devel
>>
>
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
