On Wednesday 29 May 2002 02:54 pm, Felix K�hling wrote: > I had an SIS 6326 one or two years ago and tried to make it work with > XFree 4.0.2, I think. I figured out that the SIS DRM needs the SIS > framebuffer driver. However, it does not work with SIS 6326 (at least it > didn't use to). My conclusion from this is that the SIS DRM does not > work with the SiS 6326 either. Can someone confirm this?
That would be correct. The DRM is intended for the 300 series of display chips (which figure in the 630/730 motherboard chipsets...). SiS produced the code handed it off to the community without access to the information to improve/repair the code and then dropped support of the same. They're annoyingly uncommunicative about programming information for the 3D portions of the chips (I happen to have 2D and MPEG decode support info under NDA, but not the 3D stuff. While I could probably hack some improvements to that situation, I'm not as inclined because I've got no info on the tuning, etc. of the 3D support.) -- Frank Earl _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
