On 20 Jun 2002, Sergey V. Udaltsov wrote: > > What I was trying to suggest was to _not_ load AGP and see the effect on > > that on the performance. > Good idea. I will try and report
Option "ForcePCIMode" will do the same thing, even if agpgart is loaded. > > Leif also implemented some AGP performance boxes a while ago to measure > > the AGP texturing usage. Check the archives for more info. > I will try to find this. But it would be nice to have this HOWTO on DRI > status page. > > > Option "AGPMode" "2" > On the DRI status page, it is limited to 2. Can it be 4? mach64 cards can't do more than AGP 2X, afaik. > > Somewhere in /var/log/message or /var/log/xfree86.0.log I think. > Really, Leif is right - just in glxinfo. BTW, if I set AGPMode to 1 and > 2 - it is reported correctly. But on 4 it does not report AGP at all... The X log will also report the AGP mode. Since 4x is not supported, you should se "Illegal AGP Mode" in the X log and it should fallback to PCI. > > Also don't forget to reduce the screen resolution, to see as freeing more > > onboard memory how much the fps rise. > Will see. > > Thanks for ideas > > Sergey > > > > ------------------------------------------------------- > Bringing you mounds of caffeinated joy > >>> http://thinkgeek.com/sf <<< > > _______________________________________________ > Dri-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/dri-devel > -- Leif Delgass http://www.retinalburn.net ------------------------------------------------------- Bringing you mounds of caffeinated joy >>> http://thinkgeek.com/sf <<< _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
