I hope this is the right place to report this problem ... if not, a pointer to the right place would be much appreciated.
Architecture: ia64 (zx2000) Kernel: Linux 2.6.0-test4 Card: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] X: Debian Experimental 4.3.0-0pre1v1.1
I had X working fine non-accelerated (glxgears was telling me 90 frames per second), so I concluded I needed to turn on things like DRM. Compiled the latest kernel, made the right device nodes, etc. Here's the relevant bits from the kernel dmesg:
Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected HP ZX1 AGP chipset (ioc=fed01000, lba=fed20000) agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
You are 100% in uncharted territory here. I don't know that any of the DRI drivers have ever been tested on IA64. Perhaps Mike Harris will know more. There are a couple potential 32-bit / 64-bit issues that have been identified, though. Are you running 32-bit user with 64-bit kernel?
agpgart: Maximum main memory to use for agp memory: 3923M agpgart: AGP aperture is 512M @ 0x60000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 ... everything else happens, then X starts ... agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode PCI: Found IRQ 50 for device 0000:00:00.0 IOSAPIC: vector 50 -> CPU 0x0000, enabled [drm:radeon_lock_take] *ERROR* 1 holds heavyweight lock
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
