Dave Jones gave me this list address. I'm having problems with GL apps crashing with "illegal instruction". This used to work fine until I changed motherboards. See forwarded message for more information
----- Forwarded message from Wakko Warner <[EMAIL PROTECTED]> ----- Date: Sat, 24 Jan 2004 10:39:19 -0500 From: Wakko Warner <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Re: Illegal instruction with gl Message-ID: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> In-Reply-To: <[EMAIL PROTECTED]>; from Wakko Warner on Fri, Jan 23, 2004 at 06:15:12PM -0500 Just to add to the below, I disabled acpi, highmem, smp, and preempt. Same problem. I also tried 2.4.24 kernel, same results. I modified agpgart on 2.4.24 to use generic intel init which didn't change anything. This is the first system with an intel E7505 I've used so I don't know if it's a board problem or a kernel problem. Or if it's with the matrox g400. Here's the kernel messages for agp/drm from 2.6.1 (everything enabled that I disabled): agpgart: Detected an Intel E7505 Chipset. agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 32M @ 0xf8000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode I placed some files in: http:// veg.animx.eu.org/e7505/ with some extra information (config, full dmesg, lspci -v) The space is there to prevent crawlers. > I recently upgraded my system board and now gl stuff crashes with illegal > instruction. > > Here's the trace (space in url to keep off robots) > http:// veg.animx.eu.org/strace.gl.txt > > I'm using 2.6.1 SMP PREEMPT on a dual P4 Xeon 2.66ghz (1gb ram) > > The board is a supermicro x5da8 (Intel e7505 chipset). The card is a matrox > g400 max 32mb dual head. mga, intel_agp and agpgart are loaded. > > Modifications to the kernel when I changed the board (old board was an intel > chipset, same card with 384mb ram): > Enabled ACPI > Enabled PreEmpt > Changed processor type to p4 (from pIII) > Enabled SMP > Enabled High mem (4GB) > Enable aic79xx (aic7xxx is also enabled but not used) and changed the > initial delay from 15000 to 1000 > > I also enabled new modules for the intel 1000 nic and the intel ICH ac97 > sound (both alsa and oss). > > These are the only configuration changes. I looked at the X log but saw > nothing. The kernel does not complain about anything. > > If this is a known problem, please let me know. I'm willing to try any > troubleshooting to fix this problem. Any more information available on > request. > > -- > Lab tests show that use of micro$oft causes cancer in lab animals > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Lab tests show that use of micro$oft causes cancer in lab animals - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ----- End forwarded message ----- -- Lab tests show that use of micro$oft causes cancer in lab animals ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
