On Sat, 3 Apr 2004 13:14:13 +0300 [EMAIL PROTECTED] wrote: [snip] > > I compiled and installed newest (2004-04-02) cvs dri trunk. At least now real 3d > acceleration works, I noticed it for example with watching movie with softened > picture.
That has nothing to do with 3D accel. Also, the glxgears frame rate is as low as before. You should really try reducing the color depth to 16 bit. (DefaultColorDepth 16 in XF86Config). > > What I noticed, Option "AGPMode" "4" or "2" are even little slower than "1" > (according to glxgears). What might cause this? Some mtrr settings error? My > Xfree log shows some errors with setting mtrr. > > http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/mtrr > http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/XFree86.0.log_new_dri_cvs_trunk > http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/glxgears_new_dri_cvs_trunk > > glxgears is done with Option "AGPMode" "1" and it was fastest according to > glxgears. glxgears does not use any AGP memory because there are not textures. I don't think agpmode should make any difference. On integrated chipsets the AGP mode should have no effect either way. > > > Edie Felix ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
