On Fri, 23 Apr 2004 12:01:32 -0400 Robert Adamis <[EMAIL PROTECTED]> wrote:
> Downloaded newest xfree86 4.4 compiled and installed, then downloaded > newest dri, drm and mesa and compiled and installed it all. It fixed my > unknown symbol error I was having but now I get "unknown chip id, > assuming full radeon support" from glxinfo and says direct rendering is > enabled but running glxgears locks up the system. I recall others having > this problem before but I haven't found anything that says how to fix it. > > I was wondering if this might be because the system is trying to use tcl > on this chip and that's what is causing the lockup. I recall back when I > had 3d working before it would detect the igp chip and disable TCL. So > is there a way to either get the chip detected correctly by glxinfo or > force the disable of TCL? You can set the environment variable tcl_mode to 0 or set it accordingly in the configuration file. See http://dri.sourceforge.net/cgi-bin/moin.cgi/ConfigurationInfrastructure for details. The real fix would be to make the driver know about the chip version and disable TCL on it. What's the ChipID? It should show up somewhere in /var/log/XFree86.0.log. > > I'm running Mandrake 10.0, Kernel 2.6.5, E-mahcines m5310, IGP 320 > Regards, Felix ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
