Try using DRI CVS, module drm. Do a fresh checkout, just in case.
Yes, I used the CVS from r300.sf.net. Thanks for the hint.
Still no luck.
grep "4150" drm_pciids.h {0x1002, 0x4150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
After modprobe:
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 [drm] Initialized radeon 1.12.0 20020828 on minor 0: ATI Technologies Inc RV350 AP [Radeon 9600]
Just to be sure: will the microcode only be loaded if the device will be used, e.g. by the X.org driver? Until now I just load the module and
Yes. In fact DRM driver needs Xserver to tell it which microcode to load.
don't play around with X, because the Xserver freezed my machine when I tried it 2 days ago.
This should be safe enough - with or without the patch (you won't get microcode to initialize without the patch though).
best
Vladimir Dergachev
Regards, Tino
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
