On Wed, 6 Oct 2004 13:16:38 +0200, David <[EMAIL PROTECTED]> wrote: > On Wed, 29 Sep 2004 13:16:44 -0500, Steve Holland <[EMAIL PROTECTED]> wrote: > > > - My previously reported problem with glDrawPixels is still happens. > > > Card is S3 Inc. SuperSavage IX/C SDR (rev 05) on ThinkPad T23. The > > > problem seems to be that glDrawPixels doesn't work to the back buffer. > > > For example, the 'drawpix' demo shows blackness until the 'f' key is > > > pressed to switch drawing to the front buffer. Drawpix works normally > > > when LIBGL_ALWAYS_INDIRECT is set. > > On Tue, 5 Oct 2004 15:07:22 -0400, Alex Deucher <[EMAIL PROTECTED]> wrote: > > I think I tracked this down. On supersavages (I don't know about > > other savage4 based chips, I'll test it out tonight if I get a chance) > > you need to shift the framebuffer offset passed to the tiled surface > > registers by 6 rather than 5 (in savage_dri.c): > > The drawpix demo is working for me (I have a Savage4). Hope it helps. >
Is it working for you with or without the change I mentioned? Thanks, Alex ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
