Jon Smirl wrote:
When I first boot it's fine, but when the laptop comes back from S3,
even if everything else works, the serial console just prints a couple
of characters of garbage and then dies. :(
The serial line is probably coming back at the default baud rate and
you were setting it higher when you were testing it.
That might be, but this happened both when booting with
"console=ttyS0,115200n8" and with "console=ttyS0", which I assumed
should set it to the default rate.
I altro tried to see if writing to the port would get it working again,
e.g. as reported here:
http://www.ussg.iu.edu/hypermail/linux/kernel/0502.0/1030.html
but that didn't work either.
Cheers,
Lorenzo
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel
