Please do not reply to this email: if you want to comment on the bug, go to
the URL shown below and enter yourcomments there.
https://bugs.freedesktop.org/show_bug.cgi?id=6357
Summary: savage problem: glxgears produce black window
Product: DRI
Version: XOrg CVS
Platform: PC
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: DRM modules
AssignedTo: dri-devel@lists.sourceforge.net
ReportedBy: [EMAIL PROTECTED]
Hi all,
after install latest last savage snapshot (20060311) and common libraries.
After
reloading drm modules glxgears command open a black window and don't show
anything. I must give "Ctrl-C" to close this window.
After this glxinfo shows only:
[EMAIL PROTECTED]:~/downloads$ glxinfo
name of display: :0.0
...
with no prompt return.
Before launching glxgears after X startup glxinfo reports :
Direct Rendering: Yes
dmesg reports:
mtrr: no MTRR for 92020000,10000 found
mtrr: no MTRR for 92030000,8000 found
mtrr: no MTRR for 92038000,2000 found
mtrr: MTRR 5 not used
mtrr: MTRR 6 not used
mtrr: MTRR 7 not used
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: 0x90000000,0x8000000 overlaps existing 0x96000000,0x1000000
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
mtrr: 0x90000000,0x8000000 overlaps existing 0x96000000,0x1000000
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
mtrr: 0x90000000,0x8000000 overlaps existing 0x96000000,0x1000000
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Xorg.0.log reports:
X Window System Version 6.9.0 (Minimal DRI build from X.org tree)
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.15.4 i686 [ELF]
Current Operating System: Linux mirabell2 2.6.15.4 #1 Sun Feb 19 16:22:50 CET
2006 i686
Build Date: 17 February 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 12 09:30:06 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Synaptics Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/local/share/fonts/Windows" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,unix/:7101,/usr/X11R6/lib/X11/fonts/misc"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3156 card 1071,8375 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1524,1410 card 1800,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 00:0b:0: chip 1106,3044 card 1071,8375 rev 80 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1071,8375 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1071,8375 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1071,8375 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1071,8375 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1071,8375 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1071,8375 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 1071,8375 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1071,8375 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d04 card 1071,8375 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:9:0), (0,2,5), BCTRL: 0x03c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x30000000 - 0x31ffffff (0x2000000) MX[B]
[1] -1 0 0x32000000 - 0x33ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @
0xe0000000/19, 0x90000000/27, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xa0000000 from 0xa3ffffff to
0x9fffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[1] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[2] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[3] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[4] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[5] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[7] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[8] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[9] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[10] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[11] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[12] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[1] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[2] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[3] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[4] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[5] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[7] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[8] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[9] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[10] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[11] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[12] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[8] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[9] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[10] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[15] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[16] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[17] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[18] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[19] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[20] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "savagefb"
(WW) Warning, couldn't open module savagefb
(II) UnloadModule: "savagefb"
(EE) Failed to load module "savagefb" (module does not exist, 0)
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 2.0.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) SAVAGE: driver (version 2.0.2) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ProSavageDDR found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[8] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[9] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[10] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[15] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[16] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[17] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[18] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[19] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[20] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[8] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[9] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[10] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[18] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[19] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[20] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[21] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.so
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(**) SAVAGE(0): Option "UseBIOS" "off"
(**) SAVAGE(0): Option "LCDClock" "220MHz"
(**) SAVAGE(0): Option "ForceInit"
(**) SAVAGE(0): Option "DmaType" "AGP"
(**) SAVAGE(0): Option "AGPMode" "4"
(==) SAVAGE(0): Using HW cursor
(**) SAVAGE(0): Not using video BIOS to set modes
(**) SAVAGE(0): Option: LCDClock 220.00 MHz
(**) SAVAGE(0): Option: ForceInit enabled
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(**) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(**) SAVAGE(0): Using AGP 4x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(II) SAVAGE(0): mapping MMIO @ 0xe0000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(**) SAVAGE(0): videoram = 33000k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.so
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 465.341 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(**) SAVAGE(0): - Limiting dot clock to 220.00 MHz
(II) SAVAGE(0): Generic Monitor: Using hsync range of 30.00-70.00 kHz
(II) SAVAGE(0): Generic Monitor: Using vrefresh range of 50.00-80.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(II) SAVAGE(0): Not using default mode "640x350" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x175" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "720x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "360x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) SAVAGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772
800 +hsync +vsync
(**) SAVAGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync
(**) SAVAGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) SAVAGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777
806 -hsync -vsync
(**) SAVAGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync
(**) SAVAGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) SAVAGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync
(**) SAVAGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SAVAGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync
(**) SAVAGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500
-hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SAVAGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520
-hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525
-hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) SAVAGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403
doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) SAVAGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333
doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312
doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250
doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260
doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262
doublescan -hsync -vsync
(++) SAVAGE(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x97ffffff (0x8000000) MS[B]
[1] 0 0 0xe0000000 - 0xe007ffff (0x80000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[8] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[9] -1 0 0xfedff800 - 0xfedfffff (0x800) MX[B]
[10] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[11] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[12] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[13] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[20] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[21] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[22] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[23] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[24] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[25] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): mapping framebuffer @ 0x90000000 with size 0x203a000
(II) SAVAGE(0): Splitting WC range: base: 0x90000000, size: 0x203a000
(II) SAVAGE(0): Splitting WC range: base: 0x92000000, size: 0x3a000
(II) SAVAGE(0): Splitting WC range: base: 0x92020000, size: 0x1a000
(II) SAVAGE(0): Splitting WC range: base: 0x92030000, size: 0xa000
(==) SAVAGE(0): Write-combining range (0x92038000,0x2000)
(==) SAVAGE(0): Write-combining range (0x92030000,0xa000)
(==) SAVAGE(0): Write-combining range (0x92020000,0x1a000)
(WW) SAVAGE(0): Failed to set up write-combining range (0x92000000,0x3a000)
(WW) SAVAGE(0): Failed to set up write-combining range (0x90000000,0x203a000)
(==) SAVAGE(0): Removed MMIO write-combining range (0x92038000,0x2000)
(==) SAVAGE(0): Removed MMIO write-combining range (0x92030000,0x8000)
(==) SAVAGE(0): Removed MMIO write-combining range (0x92020000,0x10000)
(II) SAVAGE(0): Splitting WC range: base: 0x92000000, size: 0x5000000
(II) SAVAGE(0): Splitting WC range: base: 0x94000000, size: 0x3000000
(==) SAVAGE(0): Write-combining range (0x96000000,0x1000000)
(==) SAVAGE(0): Write-combining range (0x94000000,0x3000000)
(==) SAVAGE(0): Write-combining range (0x92000000,0x5000000)
(II) SAVAGE(0): map aperture:0xb081a000
(II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 33000 kB of Videoram
available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] DRM interface version 1.2
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xeeaa4000
(II) SAVAGE(0): [drm] mapped SAREA 0xeeaa4000 to 0xb0818000
(II) SAVAGE(0): [drm] framebuffer handle = 0x90000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000207 [AGP 0x1106/0x3156; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xa0100000
(II) SAVAGE(0): [drm] aperture handle = 0x92000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x22595000
(II) SAVAGE(0): [drm] Status page mapped at 0xb0817000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:16,tiledwidthBytes:2048,tiledBufferSize:1572864
(II) SAVAGE(0): bpp:16,widthBytes:2048,BufferSize:1572864
(II) SAVAGE(0): videoRambytes:0x0203a000
(II) SAVAGE(0): textureSize:0x01999000
(II) SAVAGE(0): textureSize:0x01999000
(II) SAVAGE(0): textureOffset:0x00680000
(II) SAVAGE(0): depthOffset:0x00500000,depthPitch:2048
(II) SAVAGE(0): backOffset:0x00380000,backPitch:2048
(II) SAVAGE(0): Memory manager initialized to (0,0) (1024,1791)
(II) SAVAGE(0): Largest offscreen area available: 1024 x 1023
(II) SAVAGE(0): Reserved back buffer at offset 0x380000
(II) SAVAGE(0): Reserved depth buffer at offset 0x500000
(II) SAVAGE(0): Reserved 26212 kb for textures at offset 0x680000
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
28 128x128 slots
7 256x256 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(**) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00000800
(II) SAVAGE(0): [junkers] backbufferSize:0x00180000
(II) SAVAGE(0): [junkers] backOffset:0x00380000
(II) SAVAGE(0): [junkers] backPitch:0x00000800
(II) SAVAGE(0): [junkers] depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers] depthOffset:0x00500000
(II) SAVAGE(0): [junkers] depthPitch:0x00000800
(II) SAVAGE(0): [junkers] textureOffset:0x00680000
(II) SAVAGE(0): [junkers] textureSize:0x01999000
(II) SAVAGE(0): [junkers] textureSize:0x01999000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000001
(II) SAVAGE(0): [junkers] agp:offset:0x01000000
(II) SAVAGE(0): [junkers] agp:size:0x01000000
(II) SAVAGE(0): [junkers] agp:map:0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xe0000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers:map:0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x22595000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status:map:0xb0817000
(II) SAVAGE(0): [junkers] agpTextures:handle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers] apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0xa0000000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000006
(II) SAVAGE(0): [junkers] width:0x00000400
(II) SAVAGE(0): [junkers] height:0x00000300
(II) SAVAGE(0): [junkers] mem:0x0203a000
(II) SAVAGE(0): [junkers] cpp:2
(II) SAVAGE(0): [junkers] zpp:2
(II) SAVAGE(0): [junkers] agpMode:4
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x00180000
(II) SAVAGE(0): [junkers] backOffset:0x00380000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers] depthOffset:0x00500000
(II) SAVAGE(0): [junkers] textureOffset:0x00680000
(II) SAVAGE(0): [junkers] textureSize:0x01800000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers] agpTextureHandle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers] apertureHandle:0x92000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00001000
(II) SAVAGE(0): [junkers] statusHandle:0x22595000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Generic Keyboard: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "it"
(**) Generic Keyboard: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.4 (1404)
(--) Synaptics Mouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "20"
(**) Option "FingerHigh" "25"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) Synaptics Mouse touchpad found
(**) Option "CorePointer"
(**) Synaptics Mouse: Core Pointer
(II) XINPUT: Adding extended input device "Synaptics Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
(--) Synaptics Mouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) Synaptics Mouse touchpad found
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element /usr/lib/X11/fonts/Speedo, removing from
list!
SynapticsCtrl called.
With previous snapshots glxgear caused lockups with DmaMode "None" or "Command"
and were killed each time wid DmaMode "Vertex".
that's my xorg.conf:
[EMAIL PROTECTED]:~$ cat /etc/X11/xorg.conf
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "unix/:7101"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/local/share/fonts/Windows"
EndSection
Section "Module"
#Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
#Load "speedo"
Load "type1"
Load "vbe"
Load "synaptics"
Load "vgahw"
Load "fbdevhw"
Load "savagefb"
#Load "savage"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "savage"
#VideoRam 33000
#Option "UseFBDev" "true"
#Option "DmaMode" "None"
Option "DmaType" "AGP"
Option "AGPMode" "4"
#Option "BusType" "PCI"
EndSection
Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "20"
Option "FingerHigh" "25"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
#Option "CorePointer"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-70
VertRefresh 50-80
Option "DPMS"
Option "LCDClock" "200MHz"
#Option "UseBIOS" "off"
Option "ForceInit"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
#SubSection "Display"
# Depth 1
# Modes "1024x768" "800x600"
#EndSubSection
#SubSection "Display"
# Depth 4
# Modes "1024x768" "800x600"
#EndSubSection
#SubSection "Display"
# Depth 8
# Modes "1024x768" "800x600"
#EndSubSection
#SubSection "Display"
# Depth 15
# Modes "1024x768" "800x600"
#EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
Option "LCDClock" "220MHz"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
#InputDevice "Configured Mouse"
#InputDevice "Generic Mouse"
InputDevice "Synaptics Mouse" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
My video is a ProSavageDDR-K.
Any ideas to make my DRI working?
Regards,
Massimiliano
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel
