On 2/14/07, Gala Dragos <[EMAIL PROTECTED]> wrote: > Graphics Card: Savage (ProSavage8 KM266/KL266) > Kernel: 2.6.19-2895.fc6 > System: Fedora Core 6 > X system: Xorg 7.0, Mesa drivers, OpenGL installed > > I get this warnings whe running glxgears: > > libGL warning: 3D driver returned no fbconfigs. > libGL error: InitDriver failed > libGL error: reverting to (slow) indirect rendering > > I had to add the following lines to Xorg.conf file: > Section "DRI" > Mode 0666 > EndSection > > Section "Extensions" > Option "Composite" "Disable" > EndSection > > This enabled 3D support, otherwise it didn´t worked. > The ¨Extensions¨ section is required to stop the > screen flickering when running 3D apps. > > The FPS with indirect rendering is somewhere between > 60 and 80 when the machine is not busy. >
Since you are using Xorg 7.0 not have accelerated indirect rendering, only accelerated direct rendering. Alex > What´s going on? Is there 3D support for my graphics > card or what? The card is recognized as ProSavageDDR > under WindowsXP. > > lspci -v output below: > 01:00.0 VGA compatible controller: S3 Inc. VT8375 > [ProSavage8 KM266/KL266] (prog-if 00 [VGA]) > Subsystem: S3 Inc. VT8375 [ProSavage8 > KM266/KL266] > Flags: bus master, 66MHz, medium devsel, > latency 32, IRQ 5 > Memory at dfe80000 (32-bit, non-prefetchable) > [size=512K] > Memory at d0000000 (32-bit, prefetchable) > [size=128M] > Expansion ROM at dfe70000 [disabled] > [size=64K] > Capabilities: [dc] Power Management version 2 > Capabilities: [80] AGP version 2.0 > > PS: I´m not subscribed to the list, if you need to > contact me than email at [EMAIL PROTECTED] . > > Everybody can learn how to make kids, but not everyone can raise them right! > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
