Hi I've got good news, with the extra patches that appeared in the next tree the other day, KMS works perfectly on my system. That's vt's and x at the correct resolution my pointer showing on X and smooth, flicker free transitions between vt's and Y.
Good job! I've been waiting for this since i started using linux. Mike On 1/16/09, Jesse Barnes <jbar...@virtuousgeek.org> wrote: > On Tuesday, January 6, 2009 5:41 pm Mike Lothian wrote: >> 2009/1/7 Mike Lothian <m...@fireburn.co.uk>: >> > 2009/1/7 Jesse Barnes <jbar...@virtuousgeek.org>: >> >> On Tuesday, January 6, 2009 3:53 pm Mike Lothian wrote: >> >>> 2009/1/6 Jesse Barnes <jbar...@virtuousgeek.org>: >> >>> > On Tuesday, January 6, 2009 2:35 pm Mike Lothian wrote: >> >>> >> Hi there >> >>> >> >> >>> >> Thought I'd send in some info about Xorg with a KMS kernel, libdrm >> >>> >> and xf86-video-intel >> >>> >> >> >>> >> I've attached my dmesg and Xorg.0.log >> >>> >> >> >>> >> The only outputs are LVDS 15" screen an a disconnected VGA out and >> >>> >> HDMI connectors >> >>> >> >> >>> >> I'll quite happily submit a bug but thought the code was a little >> >>> >> too new to harp on about especially if this is a known issue >> >>> >> >> >>> >> Let me know if I can help further >> >>> > >> >>> > Looks like the 3D driver init failed... Maybe you need to rebuild >> >>> > your DRI driver as well against the same libdrm? >> >>> >> >>> I rebuild libdrm mesa and xf86-video-intel each time is there >> >>> something else I'm missing? >> >> >> >> This one looks like a Mesa mismatch somehow, so try rebuilding that >> >> too. >> >> >> >> -- >> >> Jesse Barnes, Intel Open Source Technology Center >> > >> > OK I've recompiled libdrm mesa and xf86-video-intel using their master >> > tree's and recompiled the head drm-intel-next branch of the kernel the >> > versions I were using before were only a few hours old >> > >> > Good news X starts, bad news is the screen goes black once KDE starts >> > to load, pretty sure it's when the compositing is started >> > >> > Another strange things happened, normally with KMS all my VTs are at >> > the laptops native resolution now they're in the top left corner at >> > what looks like 800x600 but not streched >> > >> > Also when booting from a non-KMS but regular GEM kernel UXA doesn't >> > work now. I've had to switch back to EXA >> > >> > I'm attaching my dmesg and Xorg log from the KMS retry >> > >> > Could any of the problems be caused by: >> > >> > [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for >> > disabled pipe 0 >> > >> > >> > Cheers >> > >> > Mike >> >> Oh yes and when X started is went back to the native resolution > > The "800x600 but not stretched" issue sounds like it could be related to the > initial_config bug I fixed this week. Can you give Dave's latest drm-next > tree a try? It fixes that bug (among others). Also the 2D driver needs a > few fixes we're still working on. The intel-...@lists.freedesktop.org is a > good place to watch for those. > > > -- > Jesse Barnes, Intel Open Source Technology Center > ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
