Hi, The attached dmesg is obtained on a 2.6.30.8 with:
- DRM patches mainly gathered from Fedora F-11 branch, - The following patch from mainline which addresses kernel bugzilla #13401: From: Jeff Moyer <[email protected]> Date: Fri, 11 Sep 2009 15:08:59 +0000 (+0200) Subject: cfq: choose a new next_req when a request is dispatched X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=06d2188644c85c56d243efab914f368d1d23c4a3 The user which sent me the dmesg below tells that consecutive attempts to boot into X with the *nouveau* driver is generally not possible because of random lockups. I'll have access to the machine in this week so I can try anything you want me to do. Thanks, Ozan Caglayan ---- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30.8-127 (par...@buildfarm) (gcc version 4.3.3 (Pardus Linux) ) #1 SMP Thu Oct 1 13:55:08 EEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 120000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] modified: 00000000cff70000 - 00000000cff7e000 (ACPI data) [ 0.000000] modified: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37b35000 - 37fefb72 [ 0.000000] Allocated new RAMDISK: 0070b000 - 00bc5b72 [ 0.000000] Move RAMDISK from 0000000037b35000 - 0000000037fefb71 to 0070b000 - 00bc5b71 [ 0.000000] ACPI: RSDP 000fb2c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT cff70000 0003C (v01 A_M_I_ OEMRSDT 08000820 MSFT 00000097) [ 0.000000] ACPI: FACP cff70200 00084 (v02 A_M_I_ OEMFACP 08000820 MSFT 00000097) [ 0.000000] ACPI: DSDT cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS cff7e000 00040 [ 0.000000] ACPI: APIC cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097) [ 0.000000] ACPI: MCFG cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097) [ 0.000000] ACPI: OEMB cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097) [ 0.000000] ACPI: HPET cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097) [ 0.000000] ACPI: OSFR cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2439MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000706fc4] TEXT DATA BSS ==> [0000100000 - 0000706fc4] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [0000707000 - 000070a214] BRK ==> [0000707000 - 000070a214] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [000070b000 - 0000bc5b72] NEW RAMDISK ==> [000070b000 - 0000bc5b72] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff70 [ 0.000000] On node 0 totalpages: 851710 [ 0.000000] free_area_init_node: node 0, pgdat c059d6a0, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4879 pages used for memmap [ 0.000000] HighMem zone: 619619 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages at c2a10000, static data 26972 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845055 [ 0.000000] Kernel command line: root=LABEL=PARDUS_ROOT1 splash=silent quiet vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] NR_IRQS:1280 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2497.515 MHz processor. [ 0.000999] Console: colour dummy device 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] allocated 17036160 bytes of page_cgroup [ 0.000999] please try cgroup_disable=memory option if you don't want [ 0.000999] Initializing HighMem for node 0 (000377fe:000cff70) [ 0.000999] Memory: 3350616k/3407296k available (3090k kernel code, 55372k reserved, 1848k data, 448k init, 2497992k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xffe16000 - 0xfffff000 (1956 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000999] .init : 0xc05db000 - 0xc064b000 ( 448 kB) [ 0.000999] .data : 0xc04048a3 - 0xc05d2c6c (1848 kB) [ 0.000999] .text : 0xc0100000 - 0xc04048a3 (3090 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4995.03 BogoMIPS (lpj=2497515) [ 0.000999] Security Framework initialized [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys memory [ 0.000999] Initializing cgroup subsys devices [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] Intel machine check architecture supported. [ 0.000999] Intel machine check reporting enabled on CPU#0. [ 0.000999] using mwait in idle threads. [ 0.000999] Checking 'hlt' instruction... OK. [ 0.005032] ACPI: Core revision 20090320 [ 0.016406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026955] CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.026995] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4994.91 BogoMIPS (lpj=2497455) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] Intel machine check architecture supported. [ 0.000999] Intel machine check reporting enabled on CPU#1. [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.098362] CPU1: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.098374] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.099099] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 4994.92 BogoMIPS (lpj=2497464) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] Intel machine check architecture supported. [ 0.000999] Intel machine check reporting enabled on CPU#2. [ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.171348] CPU2: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.171360] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.172077] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 4994.93 BogoMIPS (lpj=2497465) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] Intel machine check architecture supported. [ 0.000999] Intel machine check reporting enabled on CPU#3. [ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.244397] CPU3: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.244409] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.244998] Brought up 4 CPUs [ 0.245001] Total of 4 processors activated (19979.79 BogoMIPS). [ 0.245051] CPU0 attaching sched-domain: [ 0.245053] domain 0: span 0-1 level MC [ 0.245055] groups: 0 1 [ 0.245059] domain 1: span 0-3 level CPU [ 0.245061] groups: 0-1 2-3 [ 0.245064] CPU1 attaching sched-domain: [ 0.245066] domain 0: span 0-1 level MC [ 0.245068] groups: 1 0 [ 0.245071] domain 1: span 0-3 level CPU [ 0.245072] groups: 0-1 2-3 [ 0.245075] CPU2 attaching sched-domain: [ 0.245077] domain 0: span 2-3 level MC [ 0.245079] groups: 2 3 [ 0.245082] domain 1: span 0-3 level CPU [ 0.245083] groups: 2-3 0-1 [ 0.245087] CPU3 attaching sched-domain: [ 0.245088] domain 0: span 2-3 level MC [ 0.245090] groups: 3 2 [ 0.245093] domain 1: span 0-3 level CPU [ 0.245094] groups: 2-3 0-1 [ 0.245190] net_namespace: 1088 bytes [ 0.246002] Booting paravirtualized kernel on bare hardware [ 0.246127] regulator: core version 0.5 [ 0.246127] NET: Registered protocol family 16 [ 0.246135] EISA bus registered [ 0.246145] ACPI: bus type pci registered [ 0.246199] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.246201] PCI: Not using MMCONFIG. [ 0.246263] PCI: BIOS BUG #0[00000031] found [ 0.246267] PCI: Using configuration type 1 for base access [ 0.247076] bio: create slab <bio-0> at 0 [ 0.248060] ACPI: EC: Look up EC in DSDT [ 0.259905] ACPI: Interpreter enabled [ 0.259915] ACPI: (supports S0 S1 S3 S4 S5) [ 0.259934] ACPI: Using IOAPIC for interrupt routing [ 0.259982] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.262532] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.262534] PCI: Using MMCONFIG for extended config space [ 0.269218] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 24, should be 23 [20090320] [ 0.269340] ACPI: No dock devices found. [ 0.269394] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.269486] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.269488] pci 0000:00:01.0: PME# disabled [ 0.269545] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.269603] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.269659] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 0.269720] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] [ 0.269766] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.269769] pci 0000:00:1a.7: PME# disabled [ 0.269803] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] [ 0.269837] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.269840] pci 0000:00:1b.0: PME# disabled [ 0.269886] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.269889] pci 0000:00:1c.0: PME# disabled [ 0.269938] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.269941] pci 0000:00:1c.4: PME# disabled [ 0.269991] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.269994] pci 0000:00:1c.5: PME# disabled [ 0.270037] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 0.270095] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.270152] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 0.270212] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] [ 0.270258] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.270262] pci 0000:00:1d.7: PME# disabled [ 0.270419] pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07] [ 0.270424] pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883] [ 0.270429] pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807] [ 0.270434] pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483] [ 0.270439] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa41f] [ 0.270443] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9ffe800-0xf9ffefff] [ 0.270479] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270482] pci 0000:00:1f.2: PME# disabled [ 0.270505] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff] [ 0.270516] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.270554] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.270562] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.270569] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.270574] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.270579] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe980000-0xfe9fffff] [ 0.270682] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.270685] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff] [ 0.270688] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.270725] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.270765] pci 0000:03:00.0: reg 10 io port: [0xec00-0xec07] [ 0.270772] pci 0000:03:00.0: reg 14 io port: [0xe880-0xe883] [ 0.270779] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe807] [ 0.270786] pci 0000:03:00.0: reg 1c io port: [0xe480-0xe483] [ 0.270793] pci 0000:03:00.0: reg 20 io port: [0xe400-0xe40f] [ 0.270800] pci 0000:03:00.0: reg 24 32bit mmio: [0xfebffc00-0xfebffdff] [ 0.270836] pci 0000:03:00.0: supports D1 [ 0.270838] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.270842] pci 0000:03:00.0: PME# disabled [ 0.270866] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.270931] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] [ 0.270935] pci 0000:00:1c.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.270986] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff] [ 0.270994] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f] [ 0.271045] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.271050] pci 0000:02:00.0: PME# disabled [ 0.271075] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.271141] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.271145] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.271188] pci 0000:00:1e.0: transparent bridge [ 0.271210] pci_bus 0000:00: on NUMA node 0 [ 0.271215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.271357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.271410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.271505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.271555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.271617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.286762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.286869] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.286978] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.287085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.287191] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.287297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.287403] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.287514] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.287650] SCSI subsystem initialized [ 0.287680] usbcore: registered new interface driver usbfs [ 0.287680] usbcore: registered new interface driver hub [ 0.287680] usbcore: registered new device driver usb [ 0.287680] PCI: Using ACPI for IRQ routing [ 0.290970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.290975] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.296960] pnp: PnP ACPI init [ 0.296967] ACPI: bus type pnp registered [ 0.299648] pnp: PnP ACPI: found 15 devices [ 0.299650] ACPI: ACPI bus type pnp unregistered [ 0.299652] PnPBIOS: Disabled by ACPI PNP [ 0.299659] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.299665] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.299669] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.299672] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.299674] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.299677] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.299679] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.299682] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.299684] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.299689] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved [ 0.299693] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.299696] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.299700] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.299704] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.299707] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 0.299709] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.299712] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.334514] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.334517] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.334520] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff [ 0.334523] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.334526] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.334528] pci 0000:00:1c.0: IO window: disabled [ 0.334532] pci 0000:00:1c.0: MEM window: disabled [ 0.334536] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.334541] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.334543] pci 0000:00:1c.4: IO window: 0xe000-0xefff [ 0.334547] pci 0000:00:1c.4: MEM window: 0xfeb00000-0xfebfffff [ 0.334551] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.334556] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.334559] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.334563] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff [ 0.334566] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.334571] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.334573] pci 0000:00:1e.0: IO window: disabled [ 0.334577] pci 0000:00:1e.0: MEM window: disabled [ 0.334580] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.334590] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.334593] pci 0000:00:01.0: setting latency timer to 64 [ 0.334599] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.334603] pci 0000:00:1c.0: setting latency timer to 64 [ 0.334608] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.334612] pci 0000:00:1c.4: setting latency timer to 64 [ 0.334617] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.334620] pci 0000:00:1c.5: setting latency timer to 64 [ 0.334625] pci 0000:00:1e.0: setting latency timer to 64 [ 0.334629] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.334631] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.334633] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.334635] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff] [ 0.334637] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.334640] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.334642] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.334644] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.334646] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.334648] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.334651] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.334653] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.334675] NET: Registered protocol family 2 [ 0.343012] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.343242] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.343544] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.343679] TCP: Hash tables configured (established 131072 bind 65536) [ 0.343681] TCP reno registered [ 0.346028] NET: Registered protocol family 1 [ 0.346076] Unpacking initramfs... [ 0.465843] Freeing initrd memory: 4842k freed [ 0.467823] cpu0(4) debug files 119 [ 0.468198] cpu1(4) debug files 119 [ 0.469104] cpu2(4) debug files 119 [ 0.470017] cpu3(4) debug files 119 [ 0.470020] Machine check exception polling timer started. [ 0.470029] cpufreq-nforce2: No nForce2 chipset. [ 0.470139] Scanning for low memory corruption every 60 seconds [ 0.470222] audit: initializing netlink socket (disabled) [ 0.470233] type=2000 audit(1254500969.469:1): initialized [ 0.477142] highmem bounce pool size: 64 pages [ 0.477146] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.478321] VFS: Disk quotas dquot_6.5.2 [ 0.478374] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.478710] fuse init (API version 7.11) [ 0.479033] aufs 2-29 [ 0.479037] msgmni has been set to 1676 [ 0.479561] alg: No test for stdrng (krng) [ 0.479602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.479605] io scheduler noop registered [ 0.479607] io scheduler anticipatory registered [ 0.479608] io scheduler deadline registered [ 0.479639] io scheduler cfq registered (default) [ 0.479759] pci 0000:01:00.0: Boot video device [ 0.479834] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.479897] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.479992] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.480071] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.480138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.480884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.481130] vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 6144k, total 14336k [ 0.481133] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.481134] vesafb: protected mode interface info at c000:c130 [ 0.481136] vesafb: pmi: set display start = c00cc193, set palette = c00cc1ee [ 0.481138] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.481146] vesafb: scrolling: redraw [ 0.481149] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.481371] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.489237] bootsplash: silentjpeg size 23442 bytes [ 0.496622] bootsplash: ...found (1024x768, 37132 bytes, v3). [ 0.500396] Switched to high resolution mode on CPU 1 [ 0.500493] Switched to high resolution mode on CPU 2 [ 0.500553] Switched to high resolution mode on CPU 3 [ 0.500963] Switched to high resolution mode on CPU 0 [ 0.523738] Console: switching to colour frame buffer device 128x45 [ 0.561887] fb0: VESA VGA frame buffer device [ 0.561979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.561981] ACPI: Power Button [PWRF] [ 0.562032] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.562034] ACPI: Power Button [PWRB] [ 0.562320] processor ACPI_CPU:00: registered as cooling_device0 [ 0.562350] processor ACPI_CPU:01: registered as cooling_device1 [ 0.562375] processor ACPI_CPU:02: registered as cooling_device2 [ 0.562410] processor ACPI_CPU:03: registered as cooling_device3 [ 0.564603] isapnp: Scanning for PnP cards... [ 0.876592] isapnp: No Plug & Play device found [ 0.877474] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.877556] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.877841] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.888032] floppy0: no floppy controllers found [ 3.888333] loop: module loaded [ 3.888363] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 3.888384] Driver 'sd' needs updating - please use bus_type methods [ 3.888391] Driver 'sr' needs updating - please use bus_type methods [ 3.888430] Fixed MDIO Bus: probed [ 3.888449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.888468] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.888476] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.888479] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.888506] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.892404] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.892409] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.892421] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 3.902007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.902027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.902030] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.902032] usb usb1: Product: EHCI Host Controller [ 3.902035] usb usb1: Manufacturer: Linux 2.6.30.8-127 ehci_hcd [ 3.902037] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.902079] usb usb1: configuration #1 chosen from 1 choice [ 3.902106] hub 1-0:1.0: USB hub found [ 3.902117] hub 1-0:1.0: 6 ports detected [ 3.902208] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.902215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.902218] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.902233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.906136] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.906141] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.906152] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 3.916007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.916020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.916023] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.916025] usb usb2: Product: EHCI Host Controller [ 3.916028] usb usb2: Manufacturer: Linux 2.6.30.8-127 ehci_hcd [ 3.916030] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.916077] usb usb2: configuration #1 chosen from 1 choice [ 3.916104] hub 2-0:1.0: USB hub found [ 3.916109] hub 2-0:1.0: 6 ports detected [ 3.916197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.916207] uhci_hcd: USB Universal Host Controller Interface driver [ 3.916236] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.916241] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.916243] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.916260] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.916286] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 3.916309] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.916311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.916313] usb usb3: Product: UHCI Host Controller [ 3.916315] usb usb3: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.916317] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.916351] usb usb3: configuration #1 chosen from 1 choice [ 3.916370] hub 3-0:1.0: USB hub found [ 3.916375] hub 3-0:1.0: 2 ports detected [ 3.916432] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.916437] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.916439] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.916458] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.916483] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 3.916506] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.916508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.916510] usb usb4: Product: UHCI Host Controller [ 3.916512] usb usb4: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.916514] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.916546] usb usb4: configuration #1 chosen from 1 choice [ 3.916565] hub 4-0:1.0: USB hub found [ 3.916570] hub 4-0:1.0: 2 ports detected [ 3.916628] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.916633] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.916635] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.916649] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.916670] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 3.916693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.916695] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.916697] usb usb5: Product: UHCI Host Controller [ 3.916698] usb usb5: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.916700] usb usb5: SerialNumber: 0000:00:1a.2 [ 3.916731] usb usb5: configuration #1 chosen from 1 choice [ 3.916750] hub 5-0:1.0: USB hub found [ 3.916755] hub 5-0:1.0: 2 ports detected [ 3.916810] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.916815] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.916818] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.916834] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.916854] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 3.916876] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.916879] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.916880] usb usb6: Product: UHCI Host Controller [ 3.916882] usb usb6: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.916884] usb usb6: SerialNumber: 0000:00:1d.0 [ 3.916921] usb usb6: configuration #1 chosen from 1 choice [ 3.916943] hub 6-0:1.0: USB hub found [ 3.916947] hub 6-0:1.0: 2 ports detected [ 3.917021] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.917026] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.917028] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.917043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.917069] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 3.917092] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.917094] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.917096] usb usb7: Product: UHCI Host Controller [ 3.917097] usb usb7: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.917099] usb usb7: SerialNumber: 0000:00:1d.1 [ 3.917133] usb usb7: configuration #1 chosen from 1 choice [ 3.917152] hub 7-0:1.0: USB hub found [ 3.917156] hub 7-0:1.0: 2 ports detected [ 3.917209] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.917214] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.917217] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.917233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.917254] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 3.917276] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.917278] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.917280] usb usb8: Product: UHCI Host Controller [ 3.917282] usb usb8: Manufacturer: Linux 2.6.30.8-127 uhci_hcd [ 3.917284] usb usb8: SerialNumber: 0000:00:1d.2 [ 3.917316] usb usb8: configuration #1 chosen from 1 choice [ 3.917335] hub 8-0:1.0: USB hub found [ 3.917341] hub 8-0:1.0: 2 ports detected [ 3.917436] PNP: No PS/2 controller found. Probing ports directly. [ 3.920130] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.920135] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.920187] mice: PS/2 mouse device common for all mice [ 3.920342] rtc_cmos 00:03: RTC can wake from S4 [ 3.920363] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.920384] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.920411] EISA: Probing bus 0 at eisa.0 [ 3.920433] EISA: Detected 0 cards. [ 3.920605] cpuidle: using governor ladder [ 3.920606] cpuidle: using governor menu [ 3.920807] usbcore: registered new interface driver hiddev [ 3.920818] usbcore: registered new interface driver usbhid [ 3.920820] usbhid: v2.6:USB HID core driver [ 3.921090] NET: Registered protocol family 17 [ 3.921170] Using IPI No-Shortcut mode [ 3.921236] TuxOnIce 3.0.1 (http://tuxonice.net) [ 3.921276] TuxOnIce: Ignoring late initcall, as requested. [ 3.921285] registered taskstats version 1 [ 3.921420] rtc_cmos 00:03: setting system clock to 2009-10-02 16:29:34 UTC (1254500974) [ 3.921492] Freeing unused kernel memory: 448k freed [ 3.921643] Write protecting the kernel text: 3092k [ 3.921678] Write protecting the kernel read-only data: 1444k [ 4.003609] libata version 3.00 loaded. [ 4.004916] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.004940] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 4.004950] pata_acpi 0000:03:00.0: PCI INT A disabled [ 4.006706] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.006728] pata_marvell 0000:03:00.0: setting latency timer to 64 [ 4.006791] scsi0 : pata_marvell [ 4.006889] scsi1 : pata_marvell [ 4.006920] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 4.006922] ata2: DUMMY [ 4.172431] ahci 0000:00:1f.2: version 3.0 [ 4.172440] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.172480] ahci: SSS flag set, parallel bus scan disabled [ 4.172509] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 4.172512] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 4.172516] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.178052] scsi2 : ahci [ 4.178134] scsi3 : ahci [ 4.178206] scsi4 : ahci [ 4.178277] scsi5 : ahci [ 4.178347] scsi6 : ahci [ 4.178418] scsi7 : ahci [ 4.178526] ata3: SATA max UDMA/133 abar m2...@0xf9ffe800 port 0xf9ffe900 irq 19 [ 4.178529] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 [ 4.178532] ata5: SATA max UDMA/133 abar m2...@0xf9ffe800 port 0xf9ffea00 irq 19 [ 4.178534] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 [ 4.178537] ata7: SATA max UDMA/133 abar m2...@0xf9ffe800 port 0xf9ffeb00 irq 19 [ 4.178539] ata8: SATA max UDMA/133 abar m2...@0xf9ffe800 port 0xf9ffeb80 irq 19 [ 4.512016] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 4.636032] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.642350] ata3.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7 [ 4.642353] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.648760] ata3.00: configured for UDMA/133 [ 4.659101] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 4.659229] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.659286] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 4.659298] sd 2:0:0:0: [sda] Write Protect is off [ 4.659300] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.659318] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.659392] sda: sda1 sda2 < sda5 > [ 4.687088] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.882694] usb 5-2: New USB device found, idVendor=0a12, idProduct=0001 [ 4.882697] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.882701] usb 5-2: Product: BT2.0 [ 4.882761] usb 5-2: configuration #1 chosen from 1 choice [ 5.091015] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 5.254086] usb 7-1: New USB device found, idVendor=046d, idProduct=c044 [ 5.254089] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.254093] usb 7-1: Product: USB-PS/2 Optical Mouse [ 5.254095] usb 7-1: Manufacturer: Logitech [ 5.254150] usb 7-1: configuration #1 chosen from 1 choice [ 5.271311] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 [ 5.271358] generic-usb 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 5.477015] usb 7-2: new low speed USB device using uhci_hcd and address 3 [ 5.535259] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.535963] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100, ATAPI AN [ 5.536899] ata4.00: configured for UDMA/100 [ 5.548548] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5 [ 5.551902] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.551905] Uniform CD-ROM driver Revision: 3.20 [ 5.551962] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.552000] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 5.644085] usb 7-2: New USB device found, idVendor=046d, idProduct=c317 [ 5.644088] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.644091] usb 7-2: Product: USB Multimedia Keyboard [ 5.644093] usb 7-2: Manufacturer: Logitech [ 5.644147] usb 7-2: configuration #1 chosen from 1 choice [ 5.662310] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4 [ 5.662346] generic-usb 0003:046D:C317.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input0 [ 5.702135] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input5 [ 5.702177] generic-usb 0003:046D:C317.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input1 [ 5.857013] ata5: SATA link down (SStatus 0 SControl 300) [ 6.744017] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.763458] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7 [ 6.763461] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.765466] ata6.00: configured for UDMA/133 [ 6.776081] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 6.776170] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.776183] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 6.776198] sd 5:0:0:0: [sdb] Write Protect is off [ 6.776200] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.776217] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.776281] sdb: [ 6.786469] sd 5:0:0:0: [sdb] Attached SCSI disk [ 7.081012] ata7: SATA link down (SStatus 0 SControl 300) [ 7.397011] ata8: SATA link down (SStatus 0 SControl 300) [ 7.579070] brd: module loaded [ 7.596502] EXT4-fs: INFO: recovery required on readonly filesystem. [ 7.596504] EXT4-fs: write access will be enabled during recovery. [ 7.599211] EXT4-fs: barriers enabled [ 7.653772] kjournald2 starting: pid 128, dev sda5:8, commit interval 5 seconds [ 7.653789] EXT4-fs: delayed allocation enabled [ 7.653792] EXT4-fs: file extents enabled [ 7.661963] EXT4-fs: mballoc enabled [ 7.661973] EXT4-fs: recovery complete. [ 7.662179] EXT4-fs: mounted filesystem sda5 with ordered data mode [ 10.306764] udev: starting version 146 [ 11.208427] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 11.227612] iTCO_vendor_support: vendor-support=0 [ 11.234497] Linux agpgart interface v0.103 [ 11.236469] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 11.236542] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860) [ 11.236592] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.264999] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.265010] ATL1E 0000:02:00.0: setting latency timer to 64 [ 11.401934] Bluetooth: Core ver 2.15 [ 11.402056] NET: Registered protocol family 31 [ 11.402058] Bluetooth: HCI device and connection manager initialized [ 11.402060] Bluetooth: HCI socket layer initialized [ 11.422645] [drm] Initialized drm 1.1.0 20060810 [ 11.430581] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 11.430642] usbcore: registered new interface driver btusb [ 12.039466] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.039471] pci 0000:01:00.0: setting latency timer to 64 [ 12.040835] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1) [ 12.041765] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 12.079845] [drm] Module unloaded [ 12.171738] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.171770] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.269934] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 12.830641] EXT4 FS on sda5, internal journal on sda5:8 [ 13.027221] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). [ 13.075185] Adding 307192k swap on /.swap. Priority:-1 extents:2 across:315384k [ 15.360958] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 17.528516] NET: Registered protocol family 10 [ 17.529056] lo: Disabled Privacy Extensions [ 17.537960] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.557879] platform microcode: firmware: requesting intel-ucode/06-17-0a [ 17.732262] platform microcode: firmware: requesting intel-ucode/06-17-0a [ 17.743675] platform microcode: firmware: requesting intel-ucode/06-17-0a [ 17.747550] platform microcode: firmware: requesting intel-ucode/06-17-0a [ 17.751242] Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 17.845901] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 17.846028] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 17.846030] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 17.846032] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 20.546232] Bluetooth: L2CAP ver 2.13 [ 20.546234] Bluetooth: L2CAP socket layer initialized [ 21.065742] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.065745] Bluetooth: BNEP filters: protocol multicast [ 21.286614] Bridge firewalling registered [ 21.357383] bootsplash: status on console 0 changed to on [ 21.361327] Bluetooth: SCO (Voice Link) ver 0.6 [ 21.361329] Bluetooth: SCO socket layer initialized [ 21.489034] [drm] Initialized drm 1.1.0 20060810 [ 21.715216] pci 0000:01:00.0: setting latency timer to 64 [ 21.716458] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1) [ 21.717341] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 21.854327] [TTM] Zone kernel: Available graphics memory: 429384 kiB. [ 21.854330] [TTM] Zone highmem: Available graphics memory: 1678380 kiB. [ 21.868745] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.868868] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 21.877432] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 21.998627] Bluetooth: RFCOMM socket layer initialized [ 21.998633] Bluetooth: RFCOMM TTY layer initialized [ 21.998635] Bluetooth: RFCOMM ver 1.11 [ 22.291825] BUG: unable to handle kernel NULL pointer dereference at 00000006 [ 22.291831] IP: [<c0285d57>] cfq_exit_single_io_context+0x11/0x43 [ 22.291839] *pde = 00000000 [ 22.291842] Oops: 0000 [#1] SMP [ 22.291845] last sysfs file: /sys/module/l2cap/initstate [ 22.291847] Modules linked in: rfcomm nouveau ttm drm_kms_helper drm i2c_algo_bit sco bridge stp bnep l2cap xt_state ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_raw iptable_filter microcode ip_tables ipv6 x_tables snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm btusb bluetooth snd_timer snd intel_agp asus_atk0110 soundcore atl1e snd_page_alloc iTCO_wdt agpgart iTCO_vendor_support serio_raw pcspkr brd ata_generic ahci pata_marvell pata_acpi libata [last unloaded: i2c_algo_bit] [ 22.291888] [ 22.291892] Pid: 519, comm: comar Not tainted (2.6.30.8-127 #1) P5Q SE [ 22.291894] EIP: 0060:[<c0285d57>] EFLAGS: 00010206 CPU: 3 [ 22.291896] EIP is at cfq_exit_single_io_context+0x11/0x43 [ 22.291898] EAX: f64babd0 EBX: 00000006 ECX: 00000000 EDX: f6be9720 [ 22.291900] ESI: f6be9720 EDI: 00000001 EBP: f51a7f60 ESP: f51a7f50 [ 22.291902] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 22.291905] Process comar (pid: 519, ti=f51a6000 task=f66ad710 task.ti=f51a6000) [ 22.291906] Stack: [ 22.291908] f51a7f64 f6be9768 f64babd0 00000001 f51a7f70 c0285da7 f64babd0 f66ad710 [ 22.291913] f51a7f7c c027ea74 00000000 f51a7f90 c013459c f6444240 00000000 00000000 [ 22.291917] f51a7fa4 c013461b 00000000 00000000 b7d4325c f51a7fac c0134655 f51a6000 [ 22.291922] Call Trace: [ 22.291924] [<c0285da7>] ? cfq_exit_io_context+0x1e/0x26 [ 22.291927] [<c027ea74>] ? exit_io_context+0x5f/0x6b [ 22.291931] [<c013459c>] ? do_exit+0x243/0x261 [ 22.291935] [<c013461b>] ? do_group_exit+0x61/0x88 [ 22.291938] [<c0134655>] ? sys_exit_group+0x13/0x17 [ 22.291941] [<c01031d4>] ? sysenter_do_call+0x12/0x28 [ 22.291945] Code: 8b 53 0c 85 d2 74 0e 89 f8 e8 7b ff ff ff c7 43 0c 00 00 00 00 5b 5e 5f 5d c3 55 89 e5 57 56 89 d6 53 83 ec 04 8b 1a 85 db 74 2c <8b> 3b 8b 87 60 01 00 00 e8 20 ad 17 00 83 3e 00 89 45 f0 74 09 [ 22.291971] EIP: [<c0285d57>] cfq_exit_single_io_context+0x11/0x43 SS:ESP 0068:f51a7f50 [ 22.291975] CR2: 0000000000000006 [ 22.291977] ---[ end trace c1e7e9f7506f391b ]--- [ 22.291979] Fixing recursive fault but reboot is needed! [ 22.422731] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 22.429622] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 27.895006] eth0: no IPv6 routers present [ 28.382459] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus: [ 28.382468] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 2/4 Class 0x8297 Mthd 0x15e0 Data 0x00000000:0x00000000 [ 28.382470] [drm] nouveau 0000:01:00.0: magic set 1: [ 28.382472] [drm] nouveau 0000:01:00.0: 0x00408900: 0x80000000 [ 28.382475] [drm] nouveau 0000:01:00.0: 0x00408904: 0xfcfe7e6f [ 28.382477] [drm] nouveau 0000:01:00.0: 0x00408908: 0xfd9f7ffb [ 28.382480] [drm] nouveau 0000:01:00.0: 0x0040890c: 0xc000fdbd [ 28.382482] [drm] nouveau 0000:01:00.0: 0x00408910: 0xd3be356b [ 28.382485] [drm] nouveau 0000:01:00.0: 0x00408e08: 0x80000000 [ 28.382487] [drm] nouveau 0000:01:00.0: 0x00408e0c: 0x00000000 [ 28.382490] [drm] nouveau 0000:01:00.0: 0x00408e10: 0x00000000 [ 28.382492] [drm] nouveau 0000:01:00.0: 0x00408e14: 0x00000000 [ 28.382494] [drm] nouveau 0000:01:00.0: 0x00408e18: 0x00000000 [ 28.382496] [drm] nouveau 0000:01:00.0: 0x00408e1c: 0x00000000 [ 28.382499] [drm] nouveau 0000:01:00.0: 0x00408e20: 0x00000000 [ 28.382501] [drm] nouveau 0000:01:00.0: 0x00408e24: 0x00000000 [ 28.382503] [drm] nouveau 0000:01:00.0: magic set 2: [ 28.382505] [drm] nouveau 0000:01:00.0: 0x00409900: 0x80000000 [ 28.382508] [drm] nouveau 0000:01:00.0: 0x00409904: 0xfebf6f0f [ 28.382510] [drm] nouveau 0000:01:00.0: 0x00409908: 0xdffee7df [ 28.382512] [drm] nouveau 0000:01:00.0: 0x0040990c: 0xc00016d8 [ 28.382515] [drm] nouveau 0000:01:00.0: 0x00409910: 0x759f36eb [ 28.382518] [drm] nouveau 0000:01:00.0: 0x00409e08: 0x80000000 [ 28.382520] [drm] nouveau 0000:01:00.0: 0x00409e0c: 0x00000000 [ 28.382522] [drm] nouveau 0000:01:00.0: 0x00409e10: 0x00000000 [ 28.382525] [drm] nouveau 0000:01:00.0: 0x00409e14: 0x00000000 [ 28.382527] [drm] nouveau 0000:01:00.0: 0x00409e18: 0x00000000 [ 28.382529] [drm] nouveau 0000:01:00.0: 0x00409e1c: 0x00000000 [ 28.382531] [drm] nouveau 0000:01:00.0: 0x00409e20: 0x00000000 [ 28.382534] [drm] nouveau 0000:01:00.0: 0x00409e24: 0x00000000 ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf -- _______________________________________________ Dri-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/dri-devel
