Hi,
kernels 2.6.32-rc3 through 2.6.32-rc6 with i915.modesetting=1 give a
black screen on my laptop with an i830M graphics chipset. No problems if
I set i915.modesetting=0.
Some kernels of the 2.6.31-rcX series and kernel 2.6.32 that I tried
with KMS enabled, gave a flickery, unusable screen or a displaced one.
Still, I consider this new behaviour a regression.
Logging into the machine by SSH, shows that everything works fine, even
X starts up, I just don't see anything on the screen. To my surprise,
the external VGA connector delivers a signal.
I have seen a mail on this list (dri-devel) that might be related:
subject: KMS + i915 + modeset=1 fails to detect correct output on
laptop, blank/black screen
From: Denys Fedoryschenko <de...@vi...> - 2009-10-27 01:12
So, if I understand correctly, there is only one output device enabled,
which is the first in a list of device the code finds. In my case that
would be the external connector as it is shown by `dmesg`, to be found
at the end of this mail.
If you need more information, to address this issue, please let me know.
Best regards, Martin
my graphics device according to `lspci -v`:
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset
Graphics Controller] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device c002
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset
Graphics Controller]
Subsystem: Samsung Electronics Co Ltd Device c002
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
output from `dmesg`:
Linux version 2.6.32-rc6 (r...@xxx) (gcc version 4.4.1 (Debian
4.4.1-4) ) #15 Wed Nov 4 14:51:49 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000276e0000 (usable)
BIOS-e820: 00000000276e0000 - 00000000276f0000 (ACPI data)
BIOS-e820: 00000000276f0000 - 0000000027700000 (ACPI NVS)
BIOS-e820: 0000000027700000 - 0000000027780000 (usable)
BIOS-e820: 0000000027780000 - 0000000028000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x27780 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF8000000 write-back
2 base 027F80000 mask FFFF80000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 512MB, range: 128MB, type WB
reg 2, base: 654848KB, range: 512KB, type UC
total RAM coverred: 639M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 512MB, range: 128MB, type WB
reg 2, base: 654848KB, range: 512KB, type UC
initial memory mapped : 0 - 00800000
init_memory_mapping: 0000000000000000-0000000027780000
0000000000 - 0000400000 page 4k
0000400000 - 0027400000 page 2M
0027400000 - 0027780000 page 4k
kernel direct mapping tables up to 27780000 @ 10000-15000
ACPI: RSDP 000f64e0 00014 (v00 PTLTD )
ACPI: RSDT 276eaf7f 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 276efdf3 00074 (v01 INTEL 830M 06040000 PTL 0000004B)
ACPI: Override [DSDT-GEMINI ], this is unsafe: tainting kernel
Disabling lock debugging due to kernel taint
ACPI: DSDT @ 0x276eafb3 Table override, replaced with:
ACPI: DSDT c04acbe8 054DC (v01 DELL X200 06040000 INTL 20030522)
ACPI: FACS 276fcfc0 00040
ACPI: BOOT 276efe67 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 276efe8f 000BC (v01 PTLTD ACPICST1 06040000 LTP 00000001)
ACPI: SSDT 276eff4b 000B5 (v01 PTLTD ACPIPST1 06040000 LTP 00000001)
631MB LOWMEM available.
mapped low ram: 0 - 27780000
low ram: 0 - 27780000
node 0 low ram: 00000000 - 27780000
node 0 bootmap 00011000 - 00015ef0
(6 early reservations) ==> bootmem [0000000000 - 0027780000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000100000 - 000054c4a0] TEXT DATA BSS ==> [0000100000 -
000054c4a0]
#2 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 -
0000100000]
#3 [000054d000 - 000054f170] BRK ==> [000054d000 -
000054f170]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#5 [0000011000 - 0000016000] BOOTMAP ==> [0000011000 -
0000016000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00027780
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000276e0
0: 0x00027700 -> 0x00027780
On node 0 totalpages: 161518
free_area_init_node: node 0, pgdat c04c6a00, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1231 pages used for memmap
Normal zone: 156305 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
PM: Registered nosave memory: 00000000000c0000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000276e0000 - 00000000276f0000
PM: Registered nosave memory: 00000000276f0000 - 0000000027700000
Allocating PCI resources starting at 28000000 (gap: 28000000:d7800000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
160255
Kernel command line: BOOT_IMAGE=DebianKMS root=/dev/sda1
i915.modeset=1 resume=swap:/dev/sda2 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 635620k/646656k available (2808k kernel code, 10288k reserved,
1066k data, 292k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa5000 - 0xfffff000 ( 360 kB)
vmalloc : 0xe7f80000 - 0xfffa3000 ( 384 MB)
lowmem : 0xc0000000 - 0xe7780000 ( 631 MB)
.init : 0xc04c9000 - 0xc0512000 ( 292 kB)
.data : 0xc03be000 - 0xc04c8868 (1066 kB)
.text : 0xc0100000 - 0xc03be000 (2808 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:288
CPU 0 irqstacks, hard=c048c000 soft=c048d000
Console: colour VGA+ 80x50
console [tty0] enabled
Fast TSC calibration using PIT
Detected 996.552 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 1993.15 BogoMIPS (lpj=3321840)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
mce: CPU supports 5 MCE banks
CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PFAN] (on)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0x8c80-0x8c9f]
pci 0000:00:1d.1: reg 20 io port: [0x8ca0-0x8cbf]
pci 0000:00:1d.2: reg 20 io port: [0x8cc0-0x8cdf]
pci 0000:00:1f.0: quirk: region 8000-807f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 8080-80bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x9000-0x900f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x8ce0-0x8cff]
pci 0000:00:1f.5: reg 10 io port: [0x8400-0x84ff]
pci 0000:00:1f.5: reg 14 io port: [0x80c0-0x80ff]
pci 0000:00:1f.6: reg 10 io port: [0x8800-0x88ff]
pci 0000:00:1f.6: reg 14 io port: [0x8c00-0x8c7f]
pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:03.1: reg 10 32bit mmio: [0xe0201000-0xe02017ff]
pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
pci 0000:02:03.1: PME# disabled
pci 0000:02:05.0: reg 10 io port: [0xa000-0xa07f]
pci 0000:02:05.0: reg 14 32bit mmio: [0xe0201800-0xe020187f]
pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:07.0: reg 10 32bit mmio: [0xe0200000-0xe0200fff]
pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0xa3b0-0xa3bb) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xa3c0-0xa3df) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xa7b0-0xa7bb) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xa7c0-0xa7df) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xabb0-0xabbb) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xabc0-0xabdf) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xafb0-0xafbb) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp 00:01: io resource (0xafc0-0xafdf) overlaps 0000:00:1e.0 BAR 7
(0xa000-0xafff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x7b0-0x7bb has been reserved
system 00:01: ioport range 0x7c0-0x7df has been reserved
system 00:01: ioport range 0xbb0-0xbbb has been reserved
system 00:01: ioport range 0xbc0-0xbdf has been reserved
system 00:01: ioport range 0xfb0-0xfbb has been reserved
system 00:01: ioport range 0xfc0-0xfdf has been reserved
system 00:01: ioport range 0x13b0-0x13bb has been reserved
system 00:01: ioport range 0x13c0-0x13df has been reserved
system 00:01: ioport range 0x17b0-0x17bb has been reserved
system 00:01: ioport range 0x17c0-0x17df has been reserved
system 00:01: ioport range 0x1bb0-0x1bbb has been reserved
system 00:01: ioport range 0x1bc0-0x1bdf has been reserved
system 00:01: ioport range 0x1fb0-0x1fbb has been reserved
system 00:01: ioport range 0x1fc0-0x1fdf has been reserved
system 00:01: ioport range 0x23b0-0x23bb has been reserved
system 00:01: ioport range 0x23c0-0x23df has been reserved
system 00:01: ioport range 0x27b0-0x27bb has been reserved
system 00:01: ioport range 0x27c0-0x27df has been reserved
system 00:01: ioport range 0x2bb0-0x2bbb has been reserved
system 00:01: ioport range 0x2bc0-0x2bdf has been reserved
system 00:01: ioport range 0x2fb0-0x2fbb has been reserved
system 00:01: ioport range 0x2fc0-0x2fdf has been reserved
system 00:01: ioport range 0x33b0-0x33bb has been reserved
system 00:01: ioport range 0x33c0-0x33df has been reserved
system 00:01: ioport range 0x37b0-0x37bb has been reserved
system 00:01: ioport range 0x37c0-0x37df has been reserved
system 00:01: ioport range 0x3bb0-0x3bbb has been reserved
system 00:01: ioport range 0x3bc0-0x3bdf has been reserved
system 00:01: ioport range 0x3fb0-0x3fbb has been reserved
system 00:01: ioport range 0x3fc0-0x3fdf has been reserved
system 00:01: ioport range 0x43b0-0x43bb has been reserved
system 00:01: ioport range 0x43c0-0x43df has been reserved
system 00:01: ioport range 0x47b0-0x47bb has been reserved
system 00:01: ioport range 0x47c0-0x47df has been reserved
system 00:01: ioport range 0x4bb0-0x4bbb has been reserved
system 00:01: ioport range 0x4bc0-0x4bdf has been reserved
system 00:01: ioport range 0x4fb0-0x4fbb has been reserved
system 00:01: ioport range 0x4fc0-0x4fdf has been reserved
system 00:01: ioport range 0x53b0-0x53bb has been reserved
system 00:01: ioport range 0x53c0-0x53df has been reserved
system 00:01: ioport range 0x57b0-0x57bb has been reserved
system 00:01: ioport range 0x57c0-0x57df has been reserved
system 00:01: ioport range 0x5bb0-0x5bbb has been reserved
system 00:01: ioport range 0x5bc0-0x5bdf has been reserved
system 00:01: ioport range 0x5fb0-0x5fbb has been reserved
system 00:01: ioport range 0x5fc0-0x5fdf has been reserved
system 00:01: ioport range 0x63b0-0x63bb has been reserved
system 00:01: ioport range 0x63c0-0x63df has been reserved
system 00:01: ioport range 0x67b0-0x67bb has been reserved
system 00:01: ioport range 0x67c0-0x67df has been reserved
system 00:01: ioport range 0x6bb0-0x6bbb has been reserved
system 00:01: ioport range 0x6bc0-0x6bdf has been reserved
system 00:01: ioport range 0x6fb0-0x6fbb has been reserved
system 00:01: ioport range 0x6fc0-0x6fdf has been reserved
system 00:01: ioport range 0x73b0-0x73bb has been reserved
system 00:01: ioport range 0x73c0-0x73df has been reserved
system 00:01: ioport range 0x77b0-0x77bb has been reserved
system 00:01: ioport range 0x77c0-0x77df has been reserved
system 00:01: ioport range 0x7bb0-0x7bbb has been reserved
system 00:01: ioport range 0x7bc0-0x7bdf has been reserved
system 00:01: ioport range 0x7fb0-0x7fbb has been reserved
system 00:01: ioport range 0x7fc0-0x7fdf has been reserved
system 00:01: ioport range 0x83b0-0x83bb has been reserved
system 00:01: ioport range 0x83c0-0x83df has been reserved
system 00:01: ioport range 0x87b0-0x87bb has been reserved
system 00:01: ioport range 0x87c0-0x87df has been reserved
system 00:01: ioport range 0x8bb0-0x8bbb has been reserved
system 00:01: ioport range 0x8bc0-0x8bdf has been reserved
system 00:01: ioport range 0x8fb0-0x8fbb has been reserved
system 00:01: ioport range 0x8fc0-0x8fdf has been reserved
system 00:01: ioport range 0x93b0-0x93bb has been reserved
system 00:01: ioport range 0x93c0-0x93df has been reserved
system 00:01: ioport range 0x97b0-0x97bb has been reserved
system 00:01: ioport range 0x97c0-0x97df has been reserved
system 00:01: ioport range 0x9bb0-0x9bbb has been reserved
system 00:01: ioport range 0x9bc0-0x9bdf has been reserved
system 00:01: ioport range 0x9fb0-0x9fbb has been reserved
system 00:01: ioport range 0x9fc0-0x9fdf has been reserved
system 00:01: ioport range 0xb3b0-0xb3bb has been reserved
system 00:01: ioport range 0xb3c0-0xb3df has been reserved
system 00:01: ioport range 0xb7b0-0xb7bb has been reserved
system 00:01: ioport range 0xb7c0-0xb7df has been reserved
system 00:01: ioport range 0xbbb0-0xbbbb has been reserved
system 00:01: ioport range 0xbbc0-0xbbdf has been reserved
system 00:01: ioport range 0xbfb0-0xbfbb has been reserved
system 00:01: ioport range 0xbfc0-0xbfdf has been reserved
system 00:01: ioport range 0xc3b0-0xc3bb has been reserved
system 00:01: ioport range 0xc3c0-0xc3df has been reserved
system 00:01: ioport range 0xc7b0-0xc7bb has been reserved
system 00:01: ioport range 0xc7c0-0xc7df has been reserved
system 00:01: ioport range 0xcbb0-0xcbbb has been reserved
system 00:01: ioport range 0xcbc0-0xcbdf has been reserved
system 00:01: ioport range 0xcfb0-0xcfbb has been reserved
system 00:01: ioport range 0xcfc0-0xcfdf has been reserved
system 00:01: ioport range 0xd3b0-0xd3bb has been reserved
system 00:01: ioport range 0xd3c0-0xd3df has been reserved
system 00:01: ioport range 0xd7b0-0xd7bb has been reserved
system 00:01: ioport range 0xd7c0-0xd7df has been reserved
system 00:01: ioport range 0xdbb0-0xdbbb has been reserved
system 00:01: ioport range 0xdbc0-0xdbdf has been reserved
system 00:01: ioport range 0xdfb0-0xdfbb has been reserved
system 00:01: ioport range 0xdfc0-0xdfdf has been reserved
system 00:01: ioport range 0xe3b0-0xe3bb has been reserved
system 00:01: ioport range 0xe3c0-0xe3df has been reserved
system 00:01: ioport range 0xe7b0-0xe7bb has been reserved
system 00:01: ioport range 0xe7c0-0xe7df has been reserved
system 00:01: ioport range 0xebb0-0xebbb has been reserved
system 00:01: ioport range 0xebc0-0xebdf has been reserved
system 00:01: ioport range 0xefb0-0xefbb has been reserved
system 00:01: ioport range 0xefc0-0xefdf has been reserved
system 00:01: ioport range 0xf3b0-0xf3bb has been reserved
system 00:01: ioport range 0xf3c0-0xf3df has been reserved
system 00:01: ioport range 0xf7b0-0xf7bb has been reserved
system 00:01: ioport range 0xf7c0-0xf7df has been reserved
system 00:01: ioport range 0xfbb0-0xfbbb has been reserved
system 00:01: ioport range 0xfbc0-0xfbdf has been reserved
system 00:01: ioport range 0xffb0-0xffbb has been reserved
system 00:01: ioport range 0xffc0-0xffdf has been reserved
system 00:05: ioport range 0x600-0x60f has been reserved
system 00:05: ioport range 0x700-0x70f has been reserved
system 00:05: ioport range 0x8000-0x807f has been reserved
system 00:05: ioport range 0x8080-0x80bf has been reserved
system 00:05: ioport range 0x800-0x803 has been reserved
system 00:05: ioport range 0x170-0x177 has been reserved
system 00:05: ioport range 0x338-0x33f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:03.0: IO window: 0x00a400-0x00a4ff
pci 0000:02:03.0: IO window: 0x00a800-0x00a8ff
pci 0000:02:03.0: PREFETCH window: 0x28000000-0x2bffffff
pci 0000:02:03.0: MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xa000-0xafff
pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
pci 0000:00:1e.0: PREFETCH window: 0x28000000-0x2dffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:02:03.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
pci_bus 0000:02: resource 2 pref mem [0x28000000-0x2dffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xa400-0xa4ff]
pci_bus 0000:03: resource 1 io: [0xa800-0xa8ff]
pci_bus 0000:03: resource 2 pref mem [0x28000000-0x2bffffff]
pci_bus 0000:03: resource 3 mem: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Simple Boot Flag at 0x36 set to 0x1
speedstep-lib: frequency transition measured seems out of range (3600
nSec), falling back to a safe one of500000 nSec.
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.13)
msgmni has been set to 1241
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no)
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using get_cycles().
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) ->
IRQ 10
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 15M of stolen space
[drm] DAC-6: set mode 640x480 0
[drm] LVDS-8: set mode 1024x768 b
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low)
-> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9008 irq 15
ata2: port disabled. ignoring.
yenta_cardbus 0000:02:03.0: CardBus bridge found [144d:c002]
ata1.00: ATA-6: FUJITSU MHT2080AT, 0022, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10
yenta_cardbus 0000:02:03.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03
to #06
yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window:
0xa000 - 0xafff
yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window:
0xe0200000 - 0xe02fffff
yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window:
0x28000000 - 0x2dffffff
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI Shortcut mode
TuxOnIce 3.0.1 (http://tuxonice.net)
TuxOnIce: Normal swapspace found.
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 292k freed
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input6
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level,
low) -> IRQ 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
processor LNXCPU:00: registered as cooling_device0
ACPI: Battery Slot [BAT1] (battery present)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
3c59x 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) ->
IRQ 11
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
3c59x: Donald Becker and others.
0000:02:05.0: 3Com PCI 3c905C Tornado at e8736800.
ACPI: AC Adapter [ADP1] (on-line)
ohci1394 0000:02:03.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low)
-> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[e0201000-e02017ff] Max Packet=[2048] IR/IT contexts=[4/4]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) ->
IRQ 10
thermal LNXTHERM:01: registered as thermal_zone0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
serial 0000:00:1f.6: PCI INT B disabled
ACPI: Thermal Zone [THRM] (51 C)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low)
-> IRQ 10
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00008c80
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[email protected]>
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low)
-> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00008ca0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low)
-> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00008cc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ipw2200 0000:02:07.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low)
-> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200 0000:02:07.0: firmware: requesting ipw2200-bss.fw
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f0410400a4df]
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low)
-> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
intel8x0_measure_ac97_clock: measured 52521 usecs (2524 samples)
intel8x0: clocking to 48000
Adding 803240k swap on /dev/sda2. Priority:-1 extents:1 across:803240k
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 30 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbfs: unrecognised mount option "0" or missing value
usbfs: mount parameter error.
NET: Registered protocol family 10
NET: Registered protocol family 17
lib80211_crypt: registered algorithm 'TKIP'
eth0: setting full-duplex.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 [email protected]).
NET: Registered protocol family 15
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
platform microcode: firmware: requesting intel-ucode/06-0b-04
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
eth1: no IPv6 routers present
eth0: no IPv6 routers present
ttyS0: LSR safety check engaged!
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
svc: failed to register lockdv1 RPC service (errno 97).
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 1024x768 19
[drm] LVDS-8: set mode 1024x768 1a
[drm] LVDS-8: set mode 1024x768 b
[drm] DAC-6: set mode 1024x768 1b
[drm] LVDS-8: set mode 1024x768 1c
[drm] LVDS-8: set mode 1024x768 b
nfsd: last server has exited, flushing export cache
(last messages due to me playing with xrandr trying to get something
visible on the screen)
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
--
_______________________________________________
Dri-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dri-devel
