Hi Stephen, I don't think mode sense page3 returning check condition is the root cause of your mount failure. And the SCSI_CAP_GEOMETRY in tran_getcap is not mandatory. Mode page 3 and 4 are obsolete and a lot of new scsi devices don't support mode page 3 and 4. And solaris would generate disk geometry based on capacity data.
Let me ask you simple questions firstly. 1. Did you label your disk by format? I mean did you run "type" subcommand of format(1M) to label your disk? 2. Did you make file system by mkfs(1M) or newfs(1M) on your specific disk? Javen ChaoHong Guo wrote: > Steve Chang 写道: > >> Hi Javen, >> Now I had a mount device issue after driver is installed >> >> #mount /dev/dsk/c4t0d0ds0 /mnt >> >> => mount: I/O error >> Mount: cannot mount /dev/dsk/c4t0d0s0 >> >> The following are traces >> >> 0 - test unit ready - return OK >> 0 - test unit ready - return OK >> 0x1a - mode sense, page code=3, length 0x24 - return check >> condition 8 - read 1 sector from LAB=0 - return OK >> 8 - read 1 sector from LBA=1 - return OK >> 0x28 - read 1 sector from LBA=9dfffe - return OK >> 0x28 - read 1 sector from LBA=9dffff - return OK >> 8 - read 1 sector from LBA=0 - return OK >> 8 - read 1 sector from LBA=1 - return OK >> >> >> Can you advice me what could be wrong? >> >> > > > pc 3 is used by sd driver to get physical geometry. If the scsi disk > doesn't support it, > maybe you should support virtual geometry in your HBA driver, so that > sd(7d) driver > can fallback to virtual geometry. > > > You can try implementing SCSI_CAP_GEOMETRY > </source/s?defs=SCSI_CAP_GEOMETRY> in tran_getcap(). > > BTW, what HBA driver you are writing ? > > > Good luck, > -minskey > > > >> Steve >> >> >> _______________________________________________ >> driver-discuss mailing list >> driver-discuss@opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/driver-discuss >> > > _______________________________________________ driver-discuss mailing list driver-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/driver-discuss
