hi all. I have to say i'm pretty new to opensolaris and solaris in general, but till now i didn't have so many problems. I'm trying to install sxce snv_99 on a HP ML 150 G3 with a dual ethernet PCI-E and a lsi scsi hba card (both are HP). Withg scsi no problem, but i'm going crazy trying to use the broadcom nic that is on the motherboard. In dmesg i got this:
Oct 20 18:33:53 srv-storage unix: [ID 954099 kern.info] NOTICE: IRQ18 is being shared by drivers with different interrupt levels. Oct 20 18:33:53 srv-storage This may result in reduced system performance. These ar the irqs: IRQ Vect IPL Bus Trg Type CPU Share APIC/INT# Driver Name(s) 4 0xb0 12 ISA Edg Fixed 1 1 0x0/0x4 asy#0 9 0x81 9 PCI Lvl Fixed 1 1 0x0/0x9 acpi_wrapper_isr 14 0x42 5 ISA Edg Fixed 1 1 0x0/0xe ata#0 16 0x40 5 PCIe Lvl Fixed 0 3 0x0/0x10 uhci#3, cpqary3#0, pcie_pci# 2 18 0x61 6 PCI Lvl Fixed 0 2 0x0/0x12 bge#0, uhci#2 20 0x21 1 PCI Lvl Fixed 0 1 0x0/0x14 uhci#1 23 0x20 1 PCI Lvl Fixed 1 2 0x0/0x17 uhci#0, ehci#0 48 0x60 6 PCIe Edg MSI 1 1 - e1000g#0 49 0x41 5 PCI Edg MSI 0 1 - mpt#1 50 0x62 6 PCIe Edg MSI 1 1 - e1000g#1 160 0xa0 0 Edg IPI all 0 - poke_cpu 192 0xc0 13 Edg IPI all 1 - xc_serv 208 0xd0 14 Edg IPI all 1 - kcpc_hw_overflow_intr 209 0xd1 14 Edg IPI all 1 - cbe_fire 210 0xd3 14 Edg IPI all 1 - cbe_fire 240 0xe0 15 Edg IPI all 1 - xc_serv 241 0xe1 15 Edg IPI all 1 - apic_error_intr the nics: [EMAIL PROTECTED]:~$ dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE e1000g0 Ethernet up 1000 full e1000g0 e1000g1 Ethernet unknown 0 half e1000g1 If i try to force the nic: [EMAIL PROTECTED]:~$ ifconfig bge0 plumb ifconfig: cannot open link "bge0": No such device or address I don't know what to do anymore...do you have some suggestions? Thanks Pier _______________________________________________ driver-discuss mailing list driver-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/driver-discuss
