Maybe this is the same issue which we were looking at but never fully root caused.
Just to confirm, all 6 ports work with Opensolaris-200805 but 2 ports do not work with b99? I thought it might have been due to bad BIOS init on your MB, but if it's working on an earlier build then maybe not. Please determine the exact build which it starts to build. If you can find the MB online where we can order it, let me know and I'll see if there is a way we can acquire it. Marty On Mon, 2008-10-20 at 10:18 +0200, dick hoogendijk wrote: > Marty, > > I'm not sure if you're the responsable engineer of the nv_sata driver, > but as we had a lot of contact investigating some issues I wanted to > let you know the following: > > Last week I had Opensolaris-200805 (the original) installed. I could > use my SATA drive on the SATA0 port flawlessly. > After that I wiped out OS and installed SXCE.b99. MY SATA drive on > SATA0 had "gone". It could not be used. It was not even 'seen' > After I had connected it to another port (SATA2) all was well and I > could happely use it. > > Still, it's very weird that with the nv_sata driver from > OpenSolaris-200805 I -CAN- use a port and with the nv_sata driver from > b99 I can not. Some kind of regression? > _______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
