On Tue, May 19, 2009 at 11:23 PM, Thomas Wagner <[email protected]> wrote: > > for unknown reason the uhci module starts loading but never finishes. > BIOS options like changing EHCI handoff oder booting with switches > (I'll send the list separately) does not help.
Hello, did you already try any combination of: "-B intel-iommu=no" or "-B dmar-drhd-disable=yes" or, especially, "-B pci-reprog=off"? Did it not go away in snv_113 or snv_114? What are the last lines kdm would show? -- %martin > BIOS 0802 and 10xx are tested. > > The system has a internal KVM board with USB keyboard only, so it > sseems that I can't break into the kernel debugger (Interrupt prority?). > > I did screenshots see below. > It was bootet with -kdv from the USB emulated CDROM the KVM > provides. > SATA Disks are used in AHCI mode > > I used: > use_mp/W0 > moddebug/W80000000 > ::cont > > It loads ehci then loads uhci but never finishes the uhci module! > > http://87.106.176.223/~tom/uhci-hang/screen-04.png > > Thanks for looking into that! Would be interesting if someone runs > the P5Q board with 8GBs successfully. > > some prtconf outputs: > http://87.106.176.223/~tom/uhci-hang/screen-01.png > http://87.106.176.223/~tom/uhci-hang/screen-02.png > http://87.106.176.223/~tom/uhci-hang/screen-03.png > > > Thomas > _______________________________________________ > driver-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/driver-discuss > _______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
