hi Masa, I tried, but it was not able to browse internet.
After command "dladm connect-wifi -e your-essid -k secobj-name run0" It told it is connected, but browser didnt work. And I disabled the nwam by right clicking the Icone in top bar, and in properties i made to work manually. Another one issues, mv /etc/dladm/secobj.conf had only comments, there were no configuration items. So I executed the above command without -k option. When executed second time, it told connection is already established, so didnt connect. did i miss anything to make internet work? Vinay 2010/4/25 <[email protected]> > > > > ----- Original Message ----- > >Date: Sat, 24 Apr 2010 11:34:34 +0200 > >Subject: Re: [driver-discuss] Broadcom bcm4312 build error with Dell > Inspiron > > > 1545 > >From: Vinay Patil <[email protected]> > >To: Masa Murayama <[email protected]> > >Cc: [email protected] > > > > > >hi Masa, > > > >Here is some more updated log. > > > >Nowadays I am not able to connect using run0, > >Some days days before I removed run0 driver and installed Ralink driver > for > >Windows XP, using NDIS and I named device as rtndis. > >That too didn't work out, to solve problem of frequent disconnect. > > > >Then I reverted back to run driver, now I am not able to connect at all. > > > >vinay > > Vinay, > > Sorry for late response, and thank you for updating me. > > I think I could duplicate the problem. > > Usually I don't use nwam because my boxs use some network interfaces > simultaneously. run works without nwam for me. > > As you seemed to use nwam, I enabled it. With nwan, run failed to connect > to > the access point. > > If you can, please try run without nwam. > > To connect the your access point manually without nwam: > # ifconfig run0 plumb > # dladm show-wifi > # dladm scan-wifi > # dladm connect-wifi -e your-essid -k secobj-name run0 > (see /etc/dladm/secobj.conf for the secobj name ) > > I think I can resolve the issue soon. > > -masa > > >2010/4/20 Masa Murayama <[email protected]> > > > >> ----- Original Message ----- > >> >Date: Tue, 20 Apr 2010 10:18:34 PDT > >> >From: Vinay Patil <[email protected]> > >> >To: [email protected] > >> >Subject: Re: [driver-discuss] Broadcom bcm4312 build error with Dell > >> > Inspiron 1545 > >> > > >> > > >> >hi mrym, > >> > > >> >I still have the problem with frequent disconnect with device run0 > device. > >> No > >> t able to figure out the reason, was my device name wrong? or existence > of > >> 2 w > >> ifi device? I even tried manually setting OpenSolaris to only use run0, > >> still > >> there is problem, any suggestion will be helpful.. > >> > > >> >vinay > >> > >> vinay, > >> > >> Would you show me the logs in /var/adm/messages from run. > >> I'd like to identify the chipset of rt2870 family you use. > >> I have similar experience in developing. > >> > >> -masa > >> > >> >-- > >> >This message posted from opensolaris.org > >> >_______________________________________________ > >> >driver-discuss mailing list > >> >[email protected] > >> >http://mail.opensolaris.org/mailman/listinfo/driver-discuss > >> > >> > >
_______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
