Can you try using other USB2.0 mass storage devices on the same port to see if they can work? It seems possiblly the ehci hardware issue.
Thanks Guoqing ----- ??? ----- ?: Ben Middleton <ben at drn.org> ??: ???, 2009 ? 4? 29?, ??0:03 ??: Re: [driver-usb] External USB 500GB Lacie disk not recognised ???: driver-usb at opensolaris.org > Thanks both of you for your swift feedback. > > Prior to editing scsa2usb.conf: > > $ dmesg > > pr 28 13:43:45 duke usba: [ID 912658 kern.info] USB 2.0 device > (usb59f,951) operating at hi speed (USB 2.x) on USB 2.0 root hub: > storage at 1, scsa2usb1 at bus address 2 > Apr 28 13:43:45 duke usba: [ID 349649 kern.info] LaCie Hard > Drive USB 152D203380B6 > Apr 28 13:43:45 duke genunix: [ID 936769 kern.info] scsa2usb1 is > /pci at 0,0/pci1043,8277 at 1a,7/storage at 1Apr 28 13:43:45 duke genunix: > [ID 408114 kern.info] /pci at 0,0/pci1043,8277 at 1a,7/storage at 1 > (scsa2usb1) online > Apr 28 13:44:02 duke scsi: [ID 193665 kern.info] sd9 at scsa2usb1: > target 0 lun 0 > Apr 28 13:44:02 duke genunix: [ID 936769 kern.info] sd9 is > /pci at 0,0/pci1043,8277 at 1a,7/storage at 1/disk at 0,0Apr 28 13:46:39 duke > genunix: [ID 408114 kern.info] > /pci at 0,0/pci1043,8277 at 1a,7/storage at 1/disk at 0,0 (sd9) online > > Apr 28 15:25:14 duke usba: [ID 912658 kern.info] USB 2.0 device > (usb59f,951) operating at hi speed (USB 2.x) on USB 2.0 root hub: > storage at 2, scsa2usb0 at bus address 3 > Apr 28 15:25:14 duke usba: [ID 349649 kern.info] LaCie Hard > Drive USB 152D203380B6 > Apr 28 15:25:14 duke genunix: [ID 936769 kern.info] scsa2usb0 is > /pci at 0,0/pci1043,8277 at 1a,7/storage at 2Apr 28 15:25:14 duke genunix: > [ID 408114 kern.info] /pci at 0,0/pci1043,8277 at 1a,7/storage at 2 > (scsa2usb0) online > Apr 28 15:25:31 duke scsi: [ID 193665 kern.info] sd8 at scsa2usb0: > target 0 lun 0 > Apr 28 15:25:31 duke genunix: [ID 936769 kern.info] sd8 is > /pci at 0,0/pci1043,8277 at 1a,7/storage at 2/disk at 0,0Apr 28 15:28:09 duke > genunix: [ID 408114 kern.info] > /pci at 0,0/pci1043,8277 at 1a,7/storage at 2/disk at 0,0 (sd8) online > > > > After editing scsa2usb to read: > > attribute-override-list = "vid=* reduced-cmd-support=true"; > > > $ dmesg > > Apr 28 16:48:35 duke usba: [ID 691482 kern.warning] WARNING: > /pci at 0,0/pci1043,8277 at 1a,7 (ehci0): Connecting device on port 1 failed > Apr 28 16:48:48 duke usba: [ID 691482 kern.warning] WARNING: > /pci at 0,0/pci1043,8277 at 1a,7 (ehci0): Connecting device on port 2 failed > > > And neither disk is listed as connected in cfgadm > > $ cfgadm > > usb3/1 unknown disconnected > unconfigured ok > usb3/2 unknown disconnected > unconfigured ok > > > Even more peculiar is that I don't seem to be able to undo this > change now. i.e. if I comment out the attribute-override-list > setting and reboot, both USB disks are complaining with: > > $ dmesg > > Apr 28 17:02:14 duke usba: [ID 691482 kern.warning] WARNING: > /pci at 0,0/pci1043,8277 at 1a,7 (ehci0): Connecting device on port 1 failed > Apr 28 17:02:17 duke usba: [ID 691482 kern.warning] WARNING: > /pci at 0,0/pci1043,8277 at 1a,7 (ehci0): Connecting device on port 2 failed > > Any ideas? > > Ben > -- > This message posted from opensolaris.org > _______________________________________________ > driver-usb mailing list > driver-usb at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/driver-usb >
