These defines are only used to index the dev->subdevices array
during the attach. It's cleaner to just open-code the values.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfondation.org>
---
drivers/staging/comedi/drivers/usbdux.c | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbdux.c
b/drivers/staging/comedi/drivers/usbdux.c
index 9f1da8e..226b294 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -182,21 +182,6 @@ sampling rate. If you sample two channels you get 4kHz and
so on.
/* must have more buffers due to buggy USB ctr */
#define NUMOFOUTBUFFERSHIGH 10
-/* Analogue in subdevice */
-#define SUBDEV_AD 0
-
-/* Analogue out subdevice */
-#define SUBDEV_DA 1
-
-/* Digital I/O */
-#define SUBDEV_DIO 2
-
-/* counter */
-#define SUBDEV_COUNTER 3
-
-/* timer aka pwm output */
-#define SUBDEV_PWM 4
-
/* number of retries to get the right dux command */
#define RETRIES 10
@@ -2113,7 +2098,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
return ret;
/* Analog Input subdevice */
- s = &dev->subdevices[SUBDEV_AD];
+ s = &dev->subdevices[0];
dev->read_subdev = s;
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ;
@@ -2127,7 +2112,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
s->cancel = usbdux_ai_cancel;
/* Analog Output subdevice */
- s = &dev->subdevices[SUBDEV_DA];
+ s = &dev->subdevices[1];
dev->write_subdev = s;
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE;
@@ -2142,7 +2127,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
s->insn_write = usbdux_ao_insn_write;
/* Digital I/O subdevice */
- s = &dev->subdevices[SUBDEV_DIO];
+ s = &dev->subdevices[2];
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 8;
@@ -2152,7 +2137,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
s->insn_config = usbdux_dio_insn_config;
/* Counter subdevice */
- s = &dev->subdevices[SUBDEV_COUNTER];
+ s = &dev->subdevices[3];
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
s->n_chan = 4;
@@ -2163,7 +2148,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
if (devpriv->high_speed) {
/* PWM subdevice */
- s = &dev->subdevices[SUBDEV_PWM];
+ s = &dev->subdevices[4];
s->type = COMEDI_SUBD_PWM;
s->subdev_flags = SDF_WRITABLE | SDF_PWM_HBRIDGE;
s->n_chan = 8;
--
1.8.3.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
