Comedi subdevices that support asynchronous commands should have a
'cancel' handler to stop an in-progress command. Add such a handler to
the pcl711 driver module. I think merely setting the acquisition mode
to "software-triggered" would be sufficient, but also clear the
interrupt status for good luck.
Signed-off-by: Ian Abbott <abbo...@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl711.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/staging/comedi/drivers/pcl711.c
b/drivers/staging/comedi/drivers/pcl711.c
index eb800be..939a11f 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -189,6 +189,14 @@ static unsigned int pcl711_ai_get_sample(struct
comedi_device *dev,
return val & s->maxdata;
}
+static int pcl711_ai_cancel(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
+ pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG);
+ return 0;
+}
+
static irqreturn_t pcl711_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
@@ -493,6 +501,7 @@ static int pcl711_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
s->len_chanlist = 1;
s->do_cmdtest = pcl711_ai_cmdtest;
s->do_cmd = pcl711_ai_cmd;
+ s->cancel = pcl711_ai_cancel;
}
/* Analog Output subdevice */
--
1.8.3.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
