There were some conditional blocks that had an unnecessary level of
indentation in them. We can remove this to improve code clarity.
Signed-off-by: Chase Southwood <chase.southw...@yahoo.com>
---
2: Moved "else if" up to the same line as closing brace of "if". Left
braces on single line "else if" matched to an "if" requiring braces, per
CodingStyle.
.../comedi/drivers/addi-data/hwdrv_apci035.c | 31 ++++++++++------------
1 file changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index 7c40535..ebc0587 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -207,23 +207,22 @@ static int i_APCI035_ConfigTimerWatchdog(struct
comedi_device *dev,
ui_Command =
(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
- } else {
- if (data[0] == ADDIDATA_WATCHDOG) {
+ } else if (data[0] == ADDIDATA_WATCHDOG) {
- /* Set the mode : */
- /* - Disable the hardware */
- /* - Disable the counter mode */
- /* - Disable the warning */
- /* - Disable the reset */
- /* - Disable the timer mode */
+ /* Set the mode : */
+ /* - Disable the hardware */
+ /* - Disable the counter mode */
+ /* - Disable the warning */
+ /* - Disable the reset */
+ /* - Disable the timer mode */
- ui_Command = ui_Command & 0xFFF819E2UL;
+ ui_Command = ui_Command & 0xFFF819E2UL;
- } else {
- dev_err(dev->class_dev, "The parameter for
Timer/watchdog selection is in error\n");
- return -EINVAL;
- }
+ } else {
+ dev_err(dev->class_dev, "The parameter for Timer/watchdog
selection is in error\n");
+ return -EINVAL;
}
+
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -626,11 +625,9 @@ static void v_APCI035_Interrupt(int irq, void *d)
/* Read the digital temperature value */
ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal
to the sample */
- }
- else {
- if ((ui_StatusRegister2 & 0x1) == 0x1)
- send_sig(SIGIO, devpriv->tsk_Current, 0); /*
send signal to the sample */
+ } else if ((ui_StatusRegister2 & 0x1) == 0x1) {
+ send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal
to the sample */
}
return;
--
1.8.5.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
