From: Jérôme Pouiller <jerome.pouil...@silabs.com>

Since the WF200 VID/PID are not reliable, it's recommended to declare it
in the DT. Until now, if the device was not declared, the driver just
printed a warning and continue. But, the risk of a collision is too
high, the driver now returns an error.

Signed-off-by: Jérôme Pouiller <jerome.pouil...@silabs.com>
---
 drivers/staging/wfx/Kconfig    |  4 ++++
 drivers/staging/wfx/bus_sdio.c | 21 ++++++---------------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/wfx/Kconfig b/drivers/staging/wfx/Kconfig
index 01ea09cb9697..835a855409d8 100644
--- a/drivers/staging/wfx/Kconfig
+++ b/drivers/staging/wfx/Kconfig
@@ -7,3 +7,7 @@ config WFX
        help
          This is a driver for Silicons Labs WFxxx series (WF200 and further)
          chipsets. This chip can be found on SPI or SDIO buses.
+
+         Silabs does not use a reliable SDIO vendor ID. So, to avoid conflicts,
+         the driver won't probe the device if it is not also declared in the
+         Device Tree.
diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
index 6ea573221ab1..bc3df85a05b6 100644
--- a/drivers/staging/wfx/bus_sdio.c
+++ b/drivers/staging/wfx/bus_sdio.c
@@ -204,24 +204,17 @@ static int wfx_sdio_probe(struct sdio_func *func, const 
struct sdio_device_id *i
                return -ENODEV;
        }
 
+       if (!pdata) {
+               dev_warn(&func->dev, "no compatible device found in DT\n");
+               return -ENODEV;
+       }
+
        bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
        if (!bus)
                return -ENOMEM;
 
-       if (np) {
-               if (!of_match_node(wfx_sdio_of_match, np)) {
-                       dev_warn(&func->dev, "no compatible device found in 
DT\n");
-                       return -ENODEV;
-               }
-               bus->of_irq = irq_of_parse_and_map(np, 0);
-       } else {
-               dev_warn(&func->dev,
-                        "device is not declared in DT, features will be 
limited\n");
-               /* FIXME: ignore VID/PID and only rely on device tree */
-               // return -ENODEV;
-       }
-
        bus->func = func;
+       bus->of_irq = irq_of_parse_and_map(np, 0);
        sdio_set_drvdata(func, bus);
        func->card->quirks |= MMC_QUIRK_LENIENT_FN0 |
                              MMC_QUIRK_BLKSZ_FOR_BYTE_MODE |
@@ -268,8 +261,6 @@ static void wfx_sdio_remove(struct sdio_func *func)
 #define SDIO_DEVICE_ID_SILABS_WF200  0x1000
 static const struct sdio_device_id wfx_sdio_ids[] = {
        { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
-       /* FIXME: ignore VID/PID and only rely on device tree */
-       // { SDIO_DEVICE(SDIO_ANY_ID, SDIO_ANY_ID) },
        { },
 };
 MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
-- 
2.34.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to