Signed-off-by: Matthias Beyer <m...@beyermatthias.de>
---
drivers/staging/bcm/InterfaceInit.c | 43 +++++++++++++++----------------------
1 file changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/bcm/InterfaceInit.c
b/drivers/staging/bcm/InterfaceInit.c
index 4c26de1..3fb8f4a 100644
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -396,9 +396,8 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
psAd->interface_rdm = BcmRDM;
psAd->interface_wrm = BcmWRM;
- bytes = rdmalt(psAd, CHIP_ID_REG,
- (u32 *) &(psAd->chip_id),
- sizeof(u32));
+ bytes = rdmalt(psAd, CHIP_ID_REG, (u32 *) &(psAd->chip_id),
+ sizeof(u32));
if (bytes < 0) {
retval = bytes;
BCM_DEBUG_PRINT(psAd, DBG_TYPE_PRINTK, 0, 0,
@@ -410,7 +409,7 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
psAd->chip_id &= ~0xF0;
dev_info(&psIntfAdapter->udev->dev, "RDM Chip ID 0x%lx\n",
- psAd->chip_id);
+ psAd->chip_id);
iface_desc = psIntfAdapter->interface->cur_altsetting;
@@ -422,26 +421,24 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
bBcm16 = TRUE;
dev_info(&psIntfAdapter->udev->dev,
- "number of alternate setting %d\n",
- psIntfAdapter->interface->num_altsetting);
+ "number of alternate setting %d\n",
+ psIntfAdapter->interface->num_altsetting);
if (bBcm16 == TRUE) {
/* selecting alternate setting one as a default setting
* for High Speed modem. */
if (psIntfAdapter->bHighSpeedDevice)
retval = usb_set_interface(psIntfAdapter->udev,
- DEFAULT_SETTING_0,
- ALTERNATE_SETTING_1);
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT, DRV_ENTRY,
+ DEFAULT_SETTING_0,
+ ALTERNATE_SETTING_1);
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY,
DBG_LVL_ALL,
"BCM16 is applicable on this dongle\n");
if (retval || !psIntfAdapter->bHighSpeedDevice) {
usedIntOutForBulkTransfer = EP2;
endpoint = &iface_desc->endpoint[EP2].desc;
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT, DRV_ENTRY,
- DBG_LVL_ALL,
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT,
+ DRV_ENTRY, DBG_LVL_ALL,
"Interface altsetting failed or
modem is configured to Full Speed, hence will work on default setting 0\n");
/*
* If Modem is high speed device EP2 should be
@@ -454,8 +451,7 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
!usb_endpoint_is_int_out(endpoint)) ||
(!psIntfAdapter->bHighSpeedDevice &&
!usb_endpoint_is_bulk_out(endpoint))) {
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT,
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT,
DRV_ENTRY, DBG_LVL_ALL,
"Configuring the
EEPROM\n");
/* change the EP2, EP4 to INT OUT end
point */
@@ -484,25 +480,21 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
usb_endpoint_is_bulk_out(endpoint)) {
/* Once BULK is selected in FS mode.
Revert it back to INT. Else USB_IF will fail. */
UINT _uiData = ntohl(EP2_CFG_INT);
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT,
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT,
DRV_ENTRY, DBG_LVL_ALL,
"Reverting Bulk to INT
as it is in Full Speed mode.\n");
- BeceemEEPROMBulkWrite(
- psAd,
+ BeceemEEPROMBulkWrite(psAd,
(PUCHAR) & _uiData,
0x136, 4, TRUE);
}
} else {
usedIntOutForBulkTransfer = EP4;
endpoint = &iface_desc->endpoint[EP4].desc;
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT, DRV_ENTRY,
- DBG_LVL_ALL,
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT,
+ DRV_ENTRY, DBG_LVL_ALL,
"Choosing AltSetting as a
default setting.\n");
if (!usb_endpoint_is_int_out(endpoint)) {
- BCM_DEBUG_PRINT(psAd,
- DBG_TYPE_INITEXIT,
+ BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT,
DRV_ENTRY, DBG_LVL_ALL,
"Dongle does not have
BCM16 Fix.\n");
/* change the EP2, EP4 to INT OUT end
point and use EP4 in altsetting */
@@ -608,8 +600,7 @@ static int InterfaceAdapterInit(struct
bcm_interface_adapter *psIntfAdapter)
usb_set_intfdata(psIntfAdapter->interface, psIntfAdapter);
psAd->bcm_file_download = InterfaceFileDownload;
- psAd->bcm_file_readback_from_chip =
- InterfaceFileReadbackFromChip;
+ psAd->bcm_file_readback_from_chip = InterfaceFileReadbackFromChip;
psAd->interface_transmit = InterfaceTransmitPacket;
retval = CreateInterruptUrb(psIntfAdapter);
--
2.0.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
