Rename CamelCase variables and function name.
Signed-off-by: navin patidar <navin.pati...@gmail.com>
---
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 99 ++++++++---------------
1 file changed, 34 insertions(+), 65 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index 752ca42..ef1082f 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -64,81 +64,50 @@ void phy_set_bb_reg(struct adapter *adapt, u32 regaddr, u32
bitmask, u32 data)
usb_write32(adapt, regaddr, data);
}
-/* */
-/* 2. RF register R/W API */
-/* */
-/**
-* Function: phy_RFSerialRead
-*
-* OverView: Read regster from RF chips
-*
-* Input:
-* struct adapter *Adapter,
-* enum rf_radio_path eRFPath, Radio path of A/B/C/D
-* u32 Offset, The target
address to be read
-*
-* Output: None
-* Return: u32 reback value
-* Note: Threre are three types of serial operations:
-* 1. Software serial write
-* 2. Hardware LSSI-Low Speed Serial Interface
-* 3. Hardware HSSI-High speed
-* serial write. Driver need to implement (1) and (2).
-* This function is equal to the combination of
RF_ReadReg() and RFLSSIRead()
-*/
-static u32
-phy_RFSerialRead(
- struct adapter *Adapter,
- enum rf_radio_path eRFPath,
- u32 Offset
- )
+static u32 rf_serial_read(struct adapter *adapt,
+ enum rf_radio_path rfpath, u32 offset)
{
- u32 retValue = 0;
- struct hal_data_8188e *pHalData =
GET_HAL_DATA(Adapter);
- struct bb_reg_def *pPhyReg = &pHalData->PHYRegDef[eRFPath];
- u32 NewOffset;
+ u32 ret = 0;
+ struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
+ struct bb_reg_def *phyreg = &hal_data->PHYRegDef[rfpath];
+ u32 newoffset;
u32 tmplong, tmplong2;
- u8 RfPiEnable = 0;
- /* */
- /* Make sure RF register offset is correct */
- /* */
- Offset &= 0xff;
+ u8 rfpi_enable = 0;
- /* */
- /* Switch page for 8256 RF IC */
- /* */
- NewOffset = Offset;
+ offset &= 0xff;
+ newoffset = offset;
- /* For 92S LSSI Read RFLSSIRead */
- /* For RF A/B write 0x824/82c(does not work in the future) */
- /* We must use 0x824 for RF A and B to execute read trigger */
- tmplong = phy_query_bb_reg(Adapter, rFPGA0_XA_HSSIParameter2,
bMaskDWord);
- if (eRFPath == RF_PATH_A)
+ tmplong = phy_query_bb_reg(adapt, rFPGA0_XA_HSSIParameter2, bMaskDWord);
+ if (rfpath == RF_PATH_A)
tmplong2 = tmplong;
else
- tmplong2 = phy_query_bb_reg(Adapter, pPhyReg->rfHSSIPara2,
bMaskDWord);
+ tmplong2 = phy_query_bb_reg(adapt, phyreg->rfHSSIPara2,
+ bMaskDWord);
- tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) |
bLSSIReadEdge; /* T65 RF */
+ tmplong2 = (tmplong2 & (~bLSSIReadAddress)) |
+ (newoffset<<23) | bLSSIReadEdge;
- phy_set_bb_reg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord,
tmplong&(~bLSSIReadEdge));
- udelay(10);/* PlatformStallExecution(10); */
+ phy_set_bb_reg(adapt, rFPGA0_XA_HSSIParameter2, bMaskDWord,
+ tmplong&(~bLSSIReadEdge));
+ udelay(10);
- phy_set_bb_reg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2);
- udelay(100);/* PlatformStallExecution(100); */
+ phy_set_bb_reg(adapt, phyreg->rfHSSIPara2, bMaskDWord, tmplong2);
+ udelay(100);
- udelay(10);/* PlatformStallExecution(10); */
+ udelay(10);
- if (eRFPath == RF_PATH_A)
- RfPiEnable = (u8)phy_query_bb_reg(Adapter,
rFPGA0_XA_HSSIParameter1, BIT8);
- else if (eRFPath == RF_PATH_B)
- RfPiEnable = (u8)phy_query_bb_reg(Adapter,
rFPGA0_XB_HSSIParameter1, BIT8);
+ if (rfpath == RF_PATH_A)
+ rfpi_enable = (u8)phy_query_bb_reg(adapt,
rFPGA0_XA_HSSIParameter1, BIT8);
+ else if (rfpath == RF_PATH_B)
+ rfpi_enable = (u8)phy_query_bb_reg(adapt,
rFPGA0_XB_HSSIParameter1, BIT8);
- if (RfPiEnable) { /* Read from BBreg8b8, 12 bits for 8190,
20bits for T65 RF */
- retValue = phy_query_bb_reg(Adapter, pPhyReg->rfLSSIReadBackPi,
bLSSIReadBackData);
- } else { /* Read from BBreg8a0, 12 bits for 8190, 20 bits for
T65 RF */
- retValue = phy_query_bb_reg(Adapter, pPhyReg->rfLSSIReadBack,
bLSSIReadBackData);
- }
- return retValue;
+ if (rfpi_enable)
+ ret = phy_query_bb_reg(adapt, phyreg->rfLSSIReadBackPi,
+ bLSSIReadBackData);
+ else
+ ret = phy_query_bb_reg(adapt, phyreg->rfLSSIReadBack,
+ bLSSIReadBackData);
+ return ret;
}
/**
@@ -239,7 +208,7 @@ u32 rtl8188e_PHY_QueryRFReg(struct adapter *Adapter, enum
rf_radio_path eRFPath,
{
u32 Original_Value, Readback_Value, BitShift;
- Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
+ Original_Value = rf_serial_read(Adapter, eRFPath, RegAddr);
BitShift = cal_bit_shift(BitMask);
Readback_Value = (Original_Value & BitMask) >> BitShift;
@@ -277,7 +246,7 @@ rtl8188e_PHY_SetRFReg(
/* RF data is 12 bits only */
if (BitMask != bRFRegOffsetMask) {
- Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
+ Original_Value = rf_serial_read(Adapter, eRFPath, RegAddr);
BitShift = cal_bit_shift(BitMask);
Data = ((Original_Value & (~BitMask)) | (Data << BitShift));
}
--
1.7.10.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
