This member is set at the end of the driver attach and is only used to
verify that icp_multi_reset() can be called in the (*detach). The only
requirement for icp_multi_reset() to work is that the dev->mmio is valid.
Remove the 'valid' member from the private data and use 'dev->mmio' to
see if the reset can be done.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/icp_multi.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/icp_multi.c
b/drivers/staging/comedi/drivers/icp_multi.c
index fedc62e..f4e1c1c 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -107,7 +107,6 @@ static const char range_codes_analog[] = { 0x00, 0x20,
0x10, 0x30 };
*/
struct icp_multi_private {
- char valid; /* card is usable */
unsigned int AdcCmdStatus; /* ADC Command/Status register */
unsigned int DacCmdStatus; /* DAC Command/Status register */
unsigned int IntEnable; /* Interrupt Enable register */
@@ -530,18 +529,13 @@ static int icp_multi_auto_attach(struct comedi_device
*dev,
s->insn_read = icp_multi_insn_read_ctr;
s->insn_write = icp_multi_insn_write_ctr;
- devpriv->valid = 1;
-
return 0;
}
static void icp_multi_detach(struct comedi_device *dev)
{
- struct icp_multi_private *devpriv = dev->private;
-
- if (devpriv)
- if (devpriv->valid)
- icp_multi_reset(dev);
+ if (dev->mmio)
+ icp_multi_reset(dev);
comedi_pci_detach(dev);
}
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
