This function is called by the analog input (*insn_read) and (*do_cmd)
operations. The pci9118_set_chanlist() function is also called by those
operations. Setting the range and aref logically belongs with setting
the chanlist. To clarify the code, absorb pci9118_ai_set_range_aref()
into pci9118_set_chanlist().
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/adl_pci9118.c | 41 +++++++++++-----------------
1 file changed, 16 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c
b/drivers/staging/comedi/drivers/adl_pci9118.c
index 89a6ea5..8820eea 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -322,22 +322,6 @@ static void pci9118_ai_reset_fifo(struct comedi_device
*dev)
outl(0, dev->iobase + PCI9118_FIFO_RESET_REG);
}
-static void pci9118_ai_set_range_aref(struct comedi_device *dev,
- struct comedi_subdevice *s,
- unsigned int chanspec)
-{
- struct pci9118_private *devpriv = dev->private;
- unsigned int range = CR_RANGE(chanspec);
- unsigned int aref = CR_AREF(chanspec);
-
- devpriv->ai_ctrl = 0;
- if (comedi_range_is_unipolar(s, range))
- devpriv->ai_ctrl |= PCI9118_AI_CTRL_UNIP;
- if (aref == AREF_DIFF)
- devpriv->ai_ctrl |= PCI9118_AI_CTRL_DIFF;
- outl(devpriv->ai_ctrl, dev->iobase + PCI9118_AI_CTRL_REG);
-}
-
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s, int n_chan,
unsigned int *chanlist, int frontadd, int backadd)
@@ -391,9 +375,23 @@ static void pci9118_set_chanlist(struct comedi_device *dev,
int frontadd, int backadd)
{
struct pci9118_private *devpriv = dev->private;
+ unsigned int range0 = CR_RANGE(chanlist[0]);
+ unsigned int aref0 = CR_AREF(chanlist[0]);
unsigned int scanquad, gain, ssh = 0x00;
int i;
+ /*
+ * Configure analog input based on the first chanlist entry.
+ * All entries are either unipolar or bipolar and single-ended
+ * or differential.
+ */
+ devpriv->ai_ctrl = 0;
+ if (comedi_range_is_unipolar(s, range0))
+ devpriv->ai_ctrl |= PCI9118_AI_CTRL_UNIP;
+ if (aref0 == AREF_DIFF)
+ devpriv->ai_ctrl |= PCI9118_AI_CTRL_DIFF;
+ outl(devpriv->ai_ctrl, dev->iobase + PCI9118_AI_CTRL_REG);
+
/* gods know why this sequence! */
outl(2, dev->iobase + PCI9118_AI_AUTOSCAN_MODE_REG);
outl(0, dev->iobase + PCI9118_AI_AUTOSCAN_MODE_REG);
@@ -1327,14 +1325,9 @@ static int pci9118_ai_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
return -EINVAL;
/*
- * Configure analog input based on the first chanlist entry.
- * All entries are either unipolar or bipolar and single-ended
- * or differential.
- *
+ * Configure analog input and load the chanlist.
* The acqusition control bits are enabled later.
*/
- pci9118_ai_set_range_aref(dev, s, cmd->chanlist[0]);
-
pci9118_set_chanlist(dev, s, cmd->chanlist_len, cmd->chanlist,
devpriv->ai_add_front, devpriv->ai_add_back);
@@ -1443,14 +1436,12 @@ static int pci9118_ai_insn_read(struct comedi_device
*dev,
* Configure analog input based on the chanspec.
* Acqusition is software controlled without interrupts.
*/
- pci9118_ai_set_range_aref(dev, s, insn->chanspec);
+ pci9118_set_chanlist(dev, s, 1, &insn->chanspec, 0, 0);
/* set default config (disable burst and triggers) */
devpriv->ai_cfg = PCI9118_AI_CFG_PDTRG | PCI9118_AI_CFG_PETRG;
outl(devpriv->ai_cfg, dev->iobase + PCI9118_AI_CFG_REG);
- pci9118_set_chanlist(dev, s, 1, &insn->chanspec, 0, 0);
-
pci9118_ai_reset_fifo(dev);
for (i = 0; i < insn->n; i++) {
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
