For aesthetics, remove this define and just use ~APCI3120_ENABLE_EOC_INT.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 31920b6..545bc90 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -91,7 +91,6 @@ This program is distributed in the hope that it will be
useful, but WITHOUT ANY
#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT)
#define APCI3120_ENABLE_EOC_INT 0x1
-#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT)
/* status register bits */
#define APCI3120_EOC 0x8000
@@ -968,7 +967,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d)
send_sig(SIGIO, devpriv->tsk_Current, 0); /*
send signal to the sample */
} else {
/* Disable EOC Interrupt */
- devpriv->mode &= APCI3120_DISABLE_EOC_INT;
+ devpriv->mode &= ~APCI3120_ENABLE_EOC_INT;
outb(devpriv->mode,
dev->iobase + APCI3120_WRITE_MODE_SELECT);
}
@@ -1096,7 +1095,7 @@ static int apci3120_config_insn_timer(struct
comedi_device *dev,
~APCI3120_ENABLE_TIMER_COUNTER;
/* Disable Eoc and Eos Interrupts */
- devpriv->mode &= APCI3120_DISABLE_EOC_INT & APCI3120_DISABLE_EOS_INT;
+ devpriv->mode &= ~APCI3120_ENABLE_EOC_INT & APCI3120_DISABLE_EOS_INT;
outb(devpriv->mode, dev->iobase + APCI3120_WRITE_MODE_SELECT);
if (data[0] == APCI3120_TIMER) { /* initialize timer */
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
