(*insn_read) functions are supposed to do simple polled reads of a single
channel. This driver tries to be tricky and allow enabling interrupts in
the analog input (*insn_config) to allow the (*insn_read) to read samples
with the end-of-conversion interrupt.
The (*insn_config) doesn't follow the comedi API and this operation mode
is not part of the API.
Remove the interrupt support from the (*insn_read) as well as the support
code in the (*insn_config) and interrupt handler.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
.../comedi/drivers/addi-data/hwdrv_apci3120.c | 74 +++++-----------------
drivers/staging/comedi/drivers/addi_apci_3120.c | 1 -
2 files changed, 17 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 9b18abf..40ff942 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -115,10 +115,6 @@ static int apci3120_ai_insn_config(struct comedi_device
*dev,
return -1;
devpriv->b_InterruptMode = APCI3120_EOC_MODE;
- if (data[1])
- devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
- else
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
return insn->n;
}
@@ -198,11 +194,6 @@ static int apci3120_ai_insn_read(struct comedi_device *dev,
/* Initialize Timer 0 mode 4 */
apci3120_timer_set_mode(dev, 0, APCI3120_TIMER_MODE4);
- if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
- devpriv->mode |= APCI3120_MODE_EOC_IRQ_ENA;
- inw(dev->iobase + 0);
- }
-
outb(devpriv->mode, dev->iobase + APCI3120_MODE_REG);
apci3120_timer_enable(dev, 0, true);
@@ -213,22 +204,17 @@ static int apci3120_ai_insn_read(struct comedi_device
*dev,
us_TmpValue =
(unsigned short) inw(dev->iobase +
APCI3120_RD_STATUS);
- if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
-
- do {
- /* Waiting for the end of conversion */
- us_TmpValue = inw(dev->iobase +
- APCI3120_RD_STATUS);
- } while ((us_TmpValue & APCI3120_EOC) ==
- APCI3120_EOC);
-
- /* Read the result in FIFO and put it in insn
data pointer */
- us_TmpValue = inw(dev->iobase + 0);
- *data = us_TmpValue;
+ do {
+ /* Waiting for the end of conversion */
+ us_TmpValue = inw(dev->iobase +
+ APCI3120_RD_STATUS);
+ } while ((us_TmpValue & APCI3120_EOC) == APCI3120_EOC);
- apci3120_ai_reset_fifo(dev);
- }
+ /* Read the result in FIFO and put it in insn data
pointer */
+ us_TmpValue = inw(dev->iobase + 0);
+ *data = us_TmpValue;
+ apci3120_ai_reset_fifo(dev);
break;
default:
dev_err(dev->class_dev, "inputs wrong\n");
@@ -245,7 +231,6 @@ static int apci3120_reset(struct comedi_device *dev)
struct apci3120_private *devpriv = dev->private;
devpriv->ai_running = 0;
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
devpriv->b_InterruptMode = APCI3120_EOC_MODE;
/* variables used in timer subdevice */
@@ -298,7 +283,6 @@ static int apci3120_cancel(struct comedi_device *dev,
devpriv->ai_running = 0;
devpriv->b_InterruptMode = APCI3120_EOC_MODE;
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
return 0;
}
@@ -448,7 +432,6 @@ static int apci3120_cyclic_ai(int mode,
if (devpriv->us_UseDma == APCI3120_DISABLE) {
/* disable EOC and enable EOS */
devpriv->b_InterruptMode = APCI3120_EOS_MODE;
- devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
devpriv->mode |= APCI3120_MODE_EOS_IRQ_ENA;
outb(devpriv->mode, dev->iobase + APCI3120_MODE_REG);
@@ -816,9 +799,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d)
struct apci3120_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
unsigned short int_daq;
- unsigned int int_amcc, ui_Check;
-
- ui_Check = 1;
+ unsigned int int_amcc;
int_daq = inw(dev->iobase + APCI3120_RD_STATUS) & 0xf000; /* get
IRQ reasons */
int_amcc = inl(devpriv->amcc + AMCC_OP_REG_INTCSR);
@@ -845,41 +826,20 @@ static irqreturn_t apci3120_interrupt(int irq, void *d)
dev_err(dev->class_dev, "AMCC IRQ - TARGET DMA ABORT!\n");
/* Ckeck if EOC interrupt */
- if (((int_daq & 0x8) == 0)
- && (devpriv->b_InterruptMode == APCI3120_EOC_MODE)) {
- if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
-
- /* Read the AI Value */
- devpriv->ui_AiReadData[0] = inw(dev->iobase + 0);
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
- send_sig(SIGIO, devpriv->tsk_Current, 0); /*
send signal to the sample */
- } else {
- /* Disable EOC Interrupt */
- devpriv->mode &= ~APCI3120_MODE_EOC_IRQ_ENA;
- outb(devpriv->mode, dev->iobase + APCI3120_MODE_REG);
- }
+ if (((int_daq & 0x8) == 0) &&
+ (devpriv->b_InterruptMode == APCI3120_EOC_MODE)) {
+ /* nothing to do... EOC mode is not currently used */
}
/* Check If EOS interrupt */
if ((int_daq & 0x2) && (devpriv->b_InterruptMode == APCI3120_EOS_MODE))
{
-
- if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { /*
enable this in without DMA ??? */
-
- if (devpriv->ai_running) {
- ui_Check = 0;
- apci3120_interrupt_handle_eos(dev);
- devpriv->mode |= APCI3120_MODE_EOS_IRQ_ENA;
- outb(devpriv->mode,
- dev->iobase + APCI3120_MODE_REG);
- }
- } else {
- devpriv->mode &= ~APCI3120_MODE_EOS_IRQ_ENA;
+ if (devpriv->ai_running) {
+ apci3120_interrupt_handle_eos(dev);
+ devpriv->mode |= APCI3120_MODE_EOS_IRQ_ENA;
outb(devpriv->mode, dev->iobase + APCI3120_MODE_REG);
- devpriv->b_EocEosInterrupt = APCI3120_DISABLE; /*
Default settings */
- devpriv->b_InterruptMode = APCI3120_EOC_MODE;
}
-
}
+
/* Timer2 interrupt */
if (int_daq & 0x1) {
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c
b/drivers/staging/comedi/drivers/addi_apci_3120.c
index 13c06cd..e7564ad 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -128,7 +128,6 @@ struct apci3120_private {
unsigned char b_Timer2Interrupt;
unsigned int ai_running:1;
unsigned char b_InterruptMode;
- unsigned char b_EocEosInterrupt;
unsigned char b_ExttrigEnable;
struct task_struct *tsk_Current;
};
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
