Tidy up the programming of timer 2.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
.../staging/comedi/drivers/addi-data/hwdrv_apci3120.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 3656f9d..54c8583 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -426,16 +426,20 @@ static int apci3120_ai_cmd(struct comedi_device *dev,
outb(devpriv->mode, dev->iobase + APCI3120_MODE_REG);
if (cmd->stop_src == TRIG_COUNT) {
- /* configure Timer2 For counting EOS */
-
- /* (1) Init timer 2 in mode 0 and write timer value */
+ /*
+ * Timer 2 is used in MODE0 (hardware retriggerable
+ * one-shot) to count the number of scans.
+ *
+ * NOTE: not sure about the -2 value
+ */
apci3120_timer_set_mode(dev, 2, APCI3120_TIMER_MODE0);
-
- /* Set the scan stop count (not sure about the -2) */
apci3120_timer_write(dev, 2, cmd->stop_arg - 2);
apci3120_clr_timer2_interrupt(dev);
+ apci3120_timer_enable(dev, 2, true);
+
+ /* configure Timer 2 For counting EOS */
devpriv->mode |= APCI3120_MODE_TIMER2_AS_COUNTER |
APCI3120_MODE_TIMER2_CLK_EOS |
APCI3120_MODE_TIMER2_IRQ_ENA;
@@ -443,8 +447,6 @@ static int apci3120_ai_cmd(struct comedi_device *dev,
devpriv->b_Timer2Mode = APCI3120_COUNTER;
devpriv->b_Timer2Interrupt = 1;
-
- apci3120_timer_enable(dev, 2, true);
}
}
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
