On Tue, Nov 04, 2014 at 09:48:33AM +0100, Tobias Klauser wrote:
> On 2014-11-03 at 21:42:52 +0100, Stephanie Wallick
> <stephanie.s.wall...@intel.com> wrote:
> > This is where we handle media specific packets and transport. The MS driver
> > interfaces with a media agnostic (MA) driver via a series of transfer pairs.
> > Transfer pairs consist of a set of functions to pass MA USB packets back
> > and forth between MA and MS drivers. There is one transfer pair per device
> > endpoint and one transfer pair for control/management traffic. When the MA
> > driver needs to send an MA USB packet, it hands the packet off to the MS
> > layer where the packet is converted into an MS form and sent via TCP over
> > the underlying ethernet or wireless medium. When the MS driver receives a
> > packet, it converts it into an MA USB packet and hands it off the the MA
> > driver for handling.
> >
> > In addition, the MS driver provides an interface to inititate connection
> > events.
> > Because there are no physical MA USB ports in an MA USB host, the host must
> > be
> > notified via software when a device is connected.
> >
> > Lastly, the MS driver contains a number of ioctl functions that are used by
> > a
> > utility to adjust medium-related driver parameters and connect or
> > disconnect the
> > MA USB host and device drivers.
> >
> > Signed-off-by: Sean O. Stalley <sean.stal...@intel.com>
> > Signed-off-by: Stephanie Wallick <stephanie.s.wall...@intel.com>
> > ---
> > drivers/staging/mausb/drivers/mausb_ioctl.c | 373 +++++++++++++++++++
> > drivers/staging/mausb/drivers/mausb_ioctl.h | 99 +++++
> > drivers/staging/mausb/drivers/mausb_msapi.c | 110 ++++++
> > drivers/staging/mausb/drivers/mausb_msapi.h | 232 ++++++++++++
> > drivers/staging/mausb/drivers/mausb_tcp-device.c | 147 ++++++++
> > drivers/staging/mausb/drivers/mausb_tcp-host.c | 144 ++++++++
> > drivers/staging/mausb/drivers/mausb_tcp.c | 446
> > +++++++++++++++++++++++
> > drivers/staging/mausb/drivers/mausb_tcp.h | 129 +++++++
> > 8 files changed, 1680 insertions(+)
> > create mode 100644 drivers/staging/mausb/drivers/mausb_ioctl.c
> > create mode 100644 drivers/staging/mausb/drivers/mausb_ioctl.h
> > create mode 100644 drivers/staging/mausb/drivers/mausb_msapi.c
> > create mode 100644 drivers/staging/mausb/drivers/mausb_msapi.h
> > create mode 100644 drivers/staging/mausb/drivers/mausb_tcp-device.c
> > create mode 100644 drivers/staging/mausb/drivers/mausb_tcp-host.c
> > create mode 100644 drivers/staging/mausb/drivers/mausb_tcp.c
> > create mode 100644 drivers/staging/mausb/drivers/mausb_tcp.h
> >
> > diff --git a/drivers/staging/mausb/drivers/mausb_ioctl.c
> > b/drivers/staging/mausb/drivers/mausb_ioctl.c
> > new file mode 100644
> > index 0000000..0c6c6bd
> > --- /dev/null
> > +++ b/drivers/staging/mausb/drivers/mausb_ioctl.c
>
> [...]
>
> > +/**
> > + * This function is used to send a message to the user, in other words, the
> > + * calling process. It basically copies the message one byte at a time.
> > + *
> > + * @msg: The message to be sent to the user.
> > + * @buffer: The buffer in which to put the message. This buffer was
> > given to
> > + * us to fill.
> > + */
> > +void to_user(char *msg, long unsigned int buffer)
> > +{
> > + int length = (int)strlen(msg);
> > + int bytes = 0;
> > +
> > + while (length && *msg) {
> > + put_user(*(msg++), (char *)buffer++);
> > + length--;
> > + bytes++;
> > + }
>
> Any reason not to use copy_to_user here? That way, access_ok would only
> need to be executed once for the whole range.
>
> In any case, the return value of put_user/copy_to_user will need to be
> checked.
Never use put_user if you can help it, this whole function should go
away, and copy_to_user() should be used at the caller sites instead as
you point out.
thanks,
greg k-h
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
