Nice work.
This patch should move the binding from
Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
to the location instead of making a new file and leaving the old
one in place.
And use git format-patch -M to highlight any changes.
Regards
ZubairLK
On 08/11/14 05:32, Andy Yan wrote:
> Signed-off-by: Andy Yan <andy....@rock-chips.com>
> ---
> .../devicetree/bindings/drm/bridge/dw-hdmi.txt | 38
> ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> new file mode 100644
> index 0000000..aa7ed17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> @@ -0,0 +1,38 @@
> +DesignWare HDMI bridge bindings
> +
> +Required properities:
> +- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"
> + "rockchip,rk3288-dw-hdmi"
> +- reg: physical base address of the controller and length
> +- ddc-i2c-bus: the ddc i2c bus
> +- interrupts: The interrupt number to the cpu
> +
> +Optional properties
> +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
> +
> +Example:
> + hdmi: hdmi@0120000 {
> + compatible = "fsl,imx6q-hdmi";
> + reg = <0x00120000 0x9000>;
> + interrupts = <0 115 0x04>;
> + gpr = <&gpr>;
> + clocks = <&clks 123>, <&clks 124>;
> + clock-names = "iahb", "isfr";
> + ddc-i2c-bus = <&i2c2>;
> +
> + port@0 {
> + reg = <0>;
> +
> + hdmi_mux_0: endpoint {
> + remote-endpoint = <&ipu1_di0_hdmi>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + hdmi_mux_1: endpoint {
> + remote-endpoint = <&ipu1_di1_hdmi>;
> + };
> + };
> + };
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
