A patch to fix the rest of the long line warnings in the dgnc_cls.h file
found by the checkpatch.pl tool

Signed-off-by: Sean Cleator <seanclea...@hotmail.co.uk>
---
 drivers/staging/dgnc/dgnc_cls.h | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/dgnc/dgnc_cls.h b/drivers/staging/dgnc/dgnc_cls.h
index 465d79a..ee7814b 100644
--- a/drivers/staging/dgnc/dgnc_cls.h
+++ b/drivers/staging/dgnc/dgnc_cls.h
@@ -36,9 +36,12 @@
  ************************************************************************/
 
 struct cls_uart_struct {
-       u8 txrx;                /* WR  RHR/THR - Holding Reg */
+       u8 txrx;        /* WR  RHR/THR - Holding Reg */
        u8 ier;         /* WR  IER - Interrupt Enable Reg */
-       u8 isr_fcr;             /* WR  ISR/FCR - Interrupt Status Reg/Fifo 
Control Reg */
+       u8 isr_fcr;     /*
+                        * WR  ISR/FCR - Interrupt Status Reg/Fifo
+                        * Control Reg
+                        */
        u8 lcr;         /* WR  LCR - Line Control Reg */
        u8 mcr;         /* WR  MCR - Modem Control Reg */
        u8 lsr;         /* WR  LSR - Line Status Reg */
@@ -61,8 +64,9 @@ struct cls_uart_struct {
 #define UART_16654_FCR_RXTRIGGER_56    0x80
 #define UART_16654_FCR_RXTRIGGER_60     0xC0
 
-#define UART_IIR_CTSRTS                        0x20    /* Received CTS/RTS 
change of state */
-#define UART_IIR_RDI_TIMEOUT           0x0C    /* Receiver data TIMEOUT */
+/* Received CTS/RTS change of state */
+#define UART_IIR_CTSRTS                        0x20
+#define UART_IIR_RDI_TIMEOUT           0x0C    /* Receiver data TIMEOUT */
 
 /*
  * These are the EXTENDED definitions for the Exar 654's Interrupt
@@ -74,8 +78,10 @@ struct cls_uart_struct {
 #define UART_EXAR654_EFR_RTSDTR   0x40    /* Auto RTS/DTR Flow Control Enable 
*/
 #define UART_EXAR654_EFR_CTSDSR   0x80    /* Auto CTS/DSR Flow COntrol Enable 
*/
 
-#define UART_EXAR654_XOFF_DETECT  0x1     /* Indicates whether chip saw an 
incoming XOFF char  */
-#define UART_EXAR654_XON_DETECT   0x2     /* Indicates whether chip saw an 
incoming XON char */
+/* Indicates whether chip saw an incoming XOFF char */
+#define UART_EXAR654_XOFF_DETECT  0x1
+/* Indicates whether chip saw an incoming XON char */
+#define UART_EXAR654_XON_DETECT   0x2
 
 #define UART_EXAR654_IER_XOFF     0x20    /* Xoff Interrupt Enable */
 #define UART_EXAR654_IER_RTSDTR   0x40    /* Output Interrupt Enable */
-- 
2.1.3

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to